Units Setting; Resolution Setting - GE DMS Go+ Operating Manual

Default settings

Units setting

You can use the function UNIT (function group CON-
FIG) to select the required units (mm or in). You can
change the units any time. All values are adjusted ac-
cordingly.
– In the function group CONFIG, select the function
UNIT.
– Choose the required unit. The unit changes immedi-
ately.
DMS Go+

Resolution setting

You can use the function RESOLUTION (function group
CONFIG) to select the resolution for the display of read-
ings. If the setting AUTO is selected, the readings up to
100 mm are displayed with two decimal places (up to
10 in with three decimal places).
– In the function group CONFIG, select the function
RESOLUTION.
– Choose the required resolution. The display of read-
ings changes immediately.
Edition 4 (05/2014)
5 Operation
5-3