Editing Files; Expanding The File Capacity - GE DMS Go+ Operating Manual

6 Data Recorder

6.6 Editing files

You can edit stored files at any time in order to adjust
the requirements to the corresponding measurement
task and to e.g. make changes to the designations of
measurement locations.
6-24

Expanding the file capacity

If necessary, you can expand a file for saving additional
measurement results. Depending on the file type, you
can then add optional measuring points, elevations, col-
umns, or rows.
– Load a Data Recorder file (see Section Loading a
file, page 6-14).
– In the function group DR, select the function PROP-
ERTIES.
– Press one of the left or right arrow keys. The file
properties are displayed.
Edition 4 (05/2014)
Editing files
DMS Go+