Locking And Unlocking; Basic Functions; To Delete All User Codes; To Add A New User Code - TRU-BOLT 0711016 User Manual

Locking and Unlocking

1. TO UNLOCK THE LOCK
Using Keypad: Enter a valid User Code (default code is 1234) and press
1 beep and lights green.
2. TO LOCK THE LOCK
Using Keypad: Press

Basic Functions

3. DELETE ALL USER CODES
IMPORTANT: this will delete the user codes but not the programming code, enter the
following:
PC
Hear 1 beep and Light Indicator illuminates green

4. TO ADD A NEW USER CODE

The User Code
linked to a User ID
User Code
UC
For example: to add the User ID
PC
123456
Hear 1 beep and Light Indicator illuminates green
NOTE: When a NEW USER CODE is set, the default factory code (1234) is deleted for safety.
5. DELETE ONE EXISTING OR PRESET USER CODE
The unit comes with a factory User ID
IMPORTANT: To delete 1 User Code
User Code
UC
PC
Hear 1 beep and Light Indicator illuminates green
and then hear 2 beeps and lights red.
(Make sure latch is extended)
3
(you can add up to 50 new user codes)
must be a 4-8 digit combination. Each User Code
UC
(which is any number between 01-50) to identify an individual
ID
. (User ID 1-9 should be entered as 01-09 so they are 2 digits)
ID
ID
1
ID
08
in its database.
2
Existin g
PC
re-enter
- 08 to User Code
UC
5678
(Make sure latch is extended)
= 01 for User Code
ID
, the lock must have more than 1
UC
ID
is then
UC
- 5678, enter the following:
UC
re-enter
= 1234.
UC
ID
re-enter
and hear
UC
5678
Page 13