NEC SpectraView Profiler 5 User Manual page 51

Profiler
User Manual
Since ICC profiles are based on L*a*b* as well, the conversion losses
are minimized when converting color to the monitor gamut. If you
calibrate your monitor to L*, your RGB working space should have an
L* tonal response curve also. You can download such a working space
(ECI-RGB v2) from www.eci.org.
Gamma
The Gamma function is based on the native behavior of CRT monitors.
In CRTs, an electron beam excites red green and blue phosphors on the
tube's surface. Depending from the intensity of the electron beam, the
phosphors glow more or less bright.
Yet the intensity is not directly proportional to the voltage that controls the
exciting electron beam. The ratio equals a gamma function. This gamma
function can easily be modified into a different gamma behavior.
In the early days of monitor calibration, it seemed a good idea to
calibrate a monitor to a gamma that is similar to the tonal response of
printed matter, to be precise, gamma 1,8 was the characteristic of an
Apple LaserWriter. Thus gamma 1.8 became the typical Apple monitor
gamma. On a PC, where you normally did your bookkeeping, wrote
letters and prepared presentations, a more contrasty characteristic was
desirable. Thus gamma 2.2 became the typical PC gamma.
In a color managed environment these historic gammas do not make
sense any more. For one, because LCD monitors show a completely
different native tonal response, on the other hand the monitor profile
compensates for different tonal curves anyway. So it makes more sense
to calibrate your monitor to a tonal response curve that affects the data
you want to display the least: L*.
51