NEC SpectraView Profiler 5 User Manual page 27

Profiler
User Manual
Every calibration should be checked once a while (e.g. once a week) to
check if the display calibration and the profile are achieving the param-
eters which where achieved at the original calibration time.
To validate the display place the measurement instrument in the middle
of the measurement window and start the validation process with a click
on <measure>.
Then a series of color patches will be measured and the results are
compared to the measurements which where done at the time the
profile was created.
Besides the target values and the achieved values SpectraView Profiler
5 will show a tolerance value.
27