Screen Saver / Power Saving Mode; Position Of The Measurement Device - NEC SpectraView Profiler 5 User Manual

Profiler
User Manual
graphics card. Otherwise an error message will pop up in SpectraView
Profiler 5 during the profiling process.

3.3.6 Screen Saver / Power Saving Mode

During the warm up, calibration and profiling of your monitors, please
deactivate all screen savers and the power management of your operat-
ing system.
Otherwise incorrect measurements can occur during the calibration and
profiling process.

3.3.7 Position of the measurement device

Please check if the measurement device is positioned flat on the screen
surface. Otherwise ambient light can enter the sensor, resulting in false
measurements.
21