R&S FSH series Quick Start Manual page 71

Click FINISH to fi nish the installation.
The connection is now set up.
Open the R&S FSH4View software on the PC.
The INSTRUMENT CONNECT dialog opens.
Select the USB tab in the INSTRUMENT
CONNECT dialog.
Select the R&S FSH4 connection.
Click CONNECT.
The FSH internally emulates a LAN
connection. The IP address displayed by
FSH4View for the USB connection is for
information only. It is fi xed to 172.16.10.10
and cannot be changed in FSH4View or the
instrument.
69
E-02