Advertisement
3.0
Operation
The sIMPLEk-Stick includes 2 operation modes:
[1] tuning-mode
[2] calibration-mode
A change from Tuning Mode to Calibration Mode is made by plugging the sIMPLEk into any active USB
port for at least 5 seconds. The next time you plug in the sIMPLEk-Stick on the e-bike, the calibration
mode starts directly.
A calibration is necessary once, so that for each wheel circumference the actual speed in the tuning
mode is readable.
The tuning mode allows unlimited engine support (theoretically up to 100km/h | 62 mph).
9
Advertisement
