Download Print this page

Yamaha sIMPLEk-Stick Operation Manuals page 10

Advertisement

3.1
Calibration
The calibration has to be carried out once and has to be shifted during standstill and with an inserted
battery pack.
On first start, the calibration will be automatically called up. It consists of two sections. At first it will
be grossly calibrated, then more precise. In order to start the calibration mode manually, plug in the
sIMPLEk-Stick into any active USB port for at least 5 seconds. The next time you plug in the sIMPLEk-
Stick on the e-bike, the calibration mode starts directly.
In the first section of the calibration, an increased speed will be displayed on the speedometer. Remove
the sIMPLEk-Stick as closely as possible at 10.0
calibration will be start. You can see the speed on the speedometer which comes closer in small steps
to 10.0
(mph).
As soon as the 10.0
calibration is completed.
3.2
Tuning-Mode
The tuning mode is activated as soon as the sIMPLEk-Stick is inserted. The actually travelled speed
remains readable during the tuning-mode. Up to 10.0
(mph), the speed will be displayed over the second number and decimal place. Examples:
In order to balance the difference between the actual forward speed and the route displayed on the
speedometer, the maximally driven speed will be displayed on the speedometer after one minute
whilst standstill until the route will be caught up. As soon as the difference will be balanced, the
speedometer displays 0.0
will be switched off in advance, sIMPLEk-Stick stores the difference with an accuracy of 200m and
catches up the route later on.
Thus the maximal speed as well as the actually travelled route/total distance will be reproduced
correctly.
3.2.1
Resetting of the maximal speed
The maximal speed will be resetted by plugging the sIMPLEk-Stick into any active USB port for at least
5 seconds. The next time the sIMPLEk-Stick is plugged in, a new calibration is required, which starts
automatically.
will be displayed for the first time, again remove the sIMPLEk-Stick. Thus, the
5.6
(mph)
10.0
(mph)
10.5
(mph)
13.5
(mph)
(mph) again and the E-Bike switches off itself independently. If the E-Bike
(mph). If you insert the stick again, precised
ℎ), the speed is output 1: 1. Above 10.0
(
5.6
(mph)
10
(mph)
5
(mph)
35
(mph)
10

Advertisement

loading