Table of Contents
Advertisement
CamiFlex Base Unit – Head Unit
3.4 Headset: Audio settings – Head Unit
Several audio settings are available on the head unit:
- push "+" or "-" to adjust the headphone volume.
- push "MIC" and then "+" or "-" to adjust the microphone volume.
- Talk function: the "Talk" LED lights up when the microphone is enabled. 2 modes are available:
Mode 1:
Push "Talk" and hold the button to set the microphone (PushToTalk)
Release the button to disable the microphone
Mode 2:
Push "Talk" without holding the button to enable the microphone (ON/OFF)
Push "Talk" without holding the button to disable the microphone
Mode ½ can be changed by pushing simultaneous "MIC" and "Talk" buttons.
If needed, it is possible to recall default settings by pressing simultaneously "Talk", "-" and "+" buttons
during 5 seconds (LED flashing). LED will then remain still to indicate that factory settings has been
applied.
By default, the factory settings are Mode1 (PushToTalk) with medium audio level.
Settings are saved automatically 10 seconds after each change, and are recalled after each new boot.
3.5 Headset list
Headsets needs XLR 5-points and Female connector to be plugged on to the Head Unit. Dynamic
microphone is needed.
Here is a short list of compliant Headset with the Head unit. Feel free to contact us if your desired
headset is not in this list.
Brand
Model
PH-44R5
PH-88R5
PH-1 A5M
RTS
PH-3 A5M
HR-1 A5M
HR-2 A5M
CC-110-X5
CC-220-X5
Clearcom
CC-300-X5
CC-400-X5
DT108 with K 109.38 option
DT109 with K 109.38 option
Bayerdynamic
DT280 with K 190.39 or K 190.41 option
DT290 with K 190.39 or K 190.41 option
-13-
Advertisement
Table of Contents
