CamiFlex Base Unit – Head Unit
If needed, this intercom connection can support Time Code transmission
IN+
+
Time
-
IN-
Code
GND
OUT+
OUT-
INTERCOM
IN+
+
Time
IN-
Code
GND
OUT+
OUT-
INTERCOM
Note: 2 wires intercoms are not yet supported. Connecting a 2 wires intercoms may cause damages
to the system.
3.8 Genlock
Genlock is transmitted over CVBS format and supports the insertion of an extra PAL/NTSC video
stream (view finder, Teleprompter)
BNC
Genlock
PAL
NTSC
3.9 SDI
A bidirectional SD/HD/3G SDI is available on the product.
BNC
SDI In
SDI
BNC
SDI Out
3.10 Remote – RS232/RS422 (remote 1)
Serial communication (any rate up-to 900Kbps) is available thought the system:
A specific cable has to be used on Head Unit side (Hirose-20 type) and power can be injected to
power the remote control from the Base Unit side.
SubD-9
3.11 Remote – Ethernet/USB (remote 2)
Base Unit
Hybrid
Fiber
XLR3
XLR3
Base Unit
Hybrid
Fiber
XLR3
XLR3
Base Unit
Hybrid
Fiber
Base Unit
Hybrid
Fiber
Base Unit
Hybrid
Fiber
-15-
Head Unit
OUT+
OUT-
GND
IN+
IN-
HRS6
INTERCOM
Head Unit
OUT+
OUT-
GND
IN+
HRS6
IN-
INTERCOM
Head Unit
BNC
Genlock
Head Unit
BNC
SDI Out
BNC
SDI In
Head Unit
HRS20
With special cable
+
-