Operating The Remote Control Unit - JVC AV-P960E Instructions Manual

Operating the Remote Control Unit

The following functions are available with the use of the remote control unit.
1 2
CAMERA FREEZE
SD CARD
AUTO
AUTO
8
OUT
AUTO
WHITE
5m
1 [CAMERA]
3
2 [FREEZE]
EXT-IN
IMAGE SEL.
4
3 [EXT-IN]
5
BRIGHT
6
FOCUS
7
IN
ZOOM
4 [SD CARD]
5 [BRIGHT]
6 [FOCUS]
7 [ZOOM]
8 [AUTO WHITE]
*For details on the various functions, refer to page 6.
Up down ± 15˚
Left right ± 30˚
To output the camera images.
(☞ Page 6 5 [SOURCE SELECT] Buttons)
To make the camera image still.
(☞ Page 6 4 [FREEZE] Button)
The images of the device connected to the [EXT INPUT] terminal
will be outputted.
(☞ Page 6 5 [SOURCE SELECT] Buttons)
To perform functions related to SD card.
● While displaying images from other sources, SD selection mode
will be activated if this button is pressed.
(☞ Page 6 5 [SOURCE SELECT] Buttons)
To adjust the brightness of the camera image.
(☞ Page 6 2 [BRIGHT] Adjustment Buttons)
To adjust the focus of the camera image.
(☞ Page 6 3 [FOCUS] Button)
To reduce or enlarge the camera image.
(☞ Page 6 1 [ZOOM] Adjustment Buttons)
To adjust the white balance automatically.
(☞ Page 7 $ [WHITE BALANCE] Adjustment Buttons)
Remote control receiving range
The receiving range is about 5m.
The vertical plane is ± 15˚ and the horizontal plane is ± 30˚.
E-23