Part 7. Connecting Optional Equipment; Music-On-Hold/ Background Music (Figure 7-1); Connecting External Music Source - Samsung DCS 816 Installation Manual

SAMSUNG
DCS-816

PART 7. CONNECTING OPTIONAL EQUIPMENT

7.1 Music-on-Hold / Background Music (Figure 7-1)
The DCS-816 system provides one music channel which is from the built-in melody chip (internal)
or an external music source (CD player, radio etc). Section 2.7 describes how to select the
source. For the external music interface, the system requires MDF connection and the connection
can be made through the Champ connector. See Figure 2-3 and refer to section 2.5 (MDF Ca-
bling).
Use one pair twisted wires and connect the external music source (e.g. CD player) to the external
music interface via the Champ connector on the base board.
25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR

CONNECTING EXTERNAL MUSIC SOURCE

CHAMP CONNECTION
PIN COLOUR
38/13BK-O/ O-BK
CONNECT AN EXTERNAL MUSIC SOURCE TO
THE INTERFACE VIA MDF AND AN AUDIO CABLE
NO POLARITY
7-1
Installation Manual
CIRCUITS/ FUNCTIONS
T/R, External Music Interface
FIGURE 7-1