Resetting Your Network; Turning On The Tv With A Mobile Device; Connecting An Ip Control Device To The Tv; Setting Up An Internet Connection Over Ipv6 - Samsung Smart Remote E-Manual

Resetting Your Network

Settings
Restore the network settings to the factory default.

Turning on the TV with a mobile device

Settings
You can turn on the TV with your mobile device when both of them are connected to the same network.

Connecting an IP control device to the TV

Settings
You can connect an IP control device to the TV remotely to manage your IP device.
" To use this function,
" Turning this feature on may allow other IP control devices to control your TV. We recommend turning this feature on only
if an authorized third-party custom controller is installed and configured specifically for a Samsung TV and if your Wi-Fi
network is password protected.
" This function may not be supported depending on the model or geographical area.

Setting up an Internet connection over IPv6

Configuring the IPv6 connection settings
Settings
" This function may not be supported depending on the model or geographical area.
Checking the Internet connection set up over IPv6
Settings
"
This function may not be supported depending on the model or geographical area.

Changing the name of the TV on a network

Settings
You can change the name of the TV on the network. Select
General Network
General Network
General Network
Power On with Mobile must be turned on.
General Network
General Network
General System Manager
Reset Network
Try Now
Expert Settings Power On with Mobile
Expert Settings IP Remote
Expert Settings IPv6
Expert Settings IPv6 Status
Device Name
User Input at the bottom of the list and change the name.
- 23 -
Try Now