Samsung Smart Remote E-Manual page 110

The problem
The color is poor or the
picture is not bright
enough.
There is a dotted line on
the edge of the screen.
The picture is black and
white.
" If the test picture does not appear or there is noise or distortion, the TV may have a problem. Contact Samsung's Call Center
for assistance.
" If the test picture is displayed properly, there may be a problem with an external device. Please check the connections.
" If the problem persists, check the signal strength or refer to the external device's user manual.
Go to Picture and then adjust the
● Settings
● Settings
Settings
●
● Settings
See if Power Saving Mode
● Settings
Try resetting the picture.
Settings
●
Change Picture Size Settings
● Settings
If you are using AV or analog equipment, disconnect the adapter from the Component (Blue)
input port on the TV and connect it to the AV (Yellow) input port.
" The Component or AV input port may not be provided depending on the model or
geographical area.
Check whether Grayscale
● Settings
Try this!
Picture Mode, Brightness, Sharpness, and
Picture Picture Mode
Picture Expert Settings
Picture Expert Settings
Picture Expert Settings
has been enabled.
General Eco Solution
Picture Expert Settings
to 16:9 Standard.
Picture Picture Size Settings
is set to On.
General Accessibility
- 110 -
Color
Brightness
Sharpness
Color
Power Saving Mode
Reset Picture
16:9 Standard
Grayscale
settings.