Sharp UP-3301 Programming Manual page 30

9. [9 FILE]
DISPLAY: Setting item menu screen
Select "9 FILE" and press the ENTER key.
Select the file name to be preset and enter the number of
records.
The content of displayed are as listed in the table below.
DISPLAY: Type 0 entry screen
DISPLAY TEXT
RECORD
Select the CREATE /ERASE to be changed and enter the num-
ber of records.
DISPLAY: Type 1 input screen
Enter the number of records.
When an item of Type 2 is selected, the following display is shown.
DISPLAY: Type 2 input screen
Enter the number of blocks.
DISPLAY: Type 3 input screen
Enter the number of records.
UP-3301UP SRV MODE PROGRAMMING ("2 SETTING")
– 29 –
SELECT ITEM NOTE
CREATE
Select and press the LIST
Key.
ERASE,