Do you have a question about the LAM3405 and is the answer not in the manual?
Questions and answers
Colin
March 29, 2025
how to reset clock time
Simon
March 31, 2025
Why the oven will switch off the power source itself during the preheating process? Besides, the glass of the oven door is very hot and unable to touch.
1 comments:
Mr. Anderson
March 31, 2025
The Lamona LAM3405 oven does not specifically mention switching off the power source during preheating. Therefore, the reason for this behavior is not provided.
The glass on the oven door becomes very hot because the inner glass is exposed to high cooking temperatures. Although the outer door is air-cooled, the inner glass still heats up during cooking, which is normal.
This answer is automatically generated
Gweneth Connelly
April 4, 2025
How do you fit the plastic bit at the top of the glass on the oven door
1 comments:
Mr. Anderson
April 4, 2025
To fit the plastic part (top cap) at the top of the glass on the Lamona LAM3405 oven door, ensure the printed surface of the glass is facing downwards and the glass is fully located in the lower retaining slots before attempting to re-fit the top cap.
Need help?
Do you have a question about the LAM3405 and is the answer not in the manual?
Questions and answers
how to reset clock time
Why the oven will switch off the power source itself during the preheating process? Besides, the glass of the oven door is very hot and unable to touch.
The Lamona LAM3405 oven does not specifically mention switching off the power source during preheating. Therefore, the reason for this behavior is not provided.
The glass on the oven door becomes very hot because the inner glass is exposed to high cooking temperatures. Although the outer door is air-cooled, the inner glass still heats up during cooking, which is normal.
This answer is automatically generated
How do you fit the plastic bit at the top of the glass on the oven door
To fit the plastic part (top cap) at the top of the glass on the Lamona LAM3405 oven door, ensure the printed surface of the glass is facing downwards and the glass is fully located in the lower retaining slots before attempting to re-fit the top cap.
This answer is automatically generated