Fujitsu ARROWS NX F-01K Instruction Manual page 97

◆ Tap & pay
Enable or disable the setting of the service available by holding
the terminal over the IC card reader, such as Osaifu-Keitai
service.
･
For details on Tap & pay, on the Tap & pay screen, [MENU]
→[Help].
1
From the Home screen,
[Wireless & networks]
2
[NFC/Osaifu-Keitai Settings]→[Tap & pay]
Tap & pay screen appears.
✔INFORMATION
･
When Emergency mode is set/released, the setting of
enabling/disabling of Osaifu-Keitai compatible services may
be changed.
When Emergency mode is set/released, to use Osaifu-Keitai
compatible services, check the settings of Tap & pay and hold
the terminal over the IC card reader.→P40
→[Settings]→
◆ Notes when holding over the other
device
Pay attention to the following when holding the terminal over
a card reader, NFC module equipped device, etc.
mark
･
Bring mark close to the device slowly, do not hit it
strongly.
･
Hold mark over the center of the compatible device in
parallel. If scanning fails even with it held over the center of
the scanner, slightly lift up the terminal, or move it
backwards/forwards or to the left/right.
･
If there are metal objects between
device, scanning may fail. Putting the terminal into a case or
cover may affect communication. In that case, remove the
case or cover.
95
IC card reader
mark and the other
Applications