Waterproofness/Dustproofness, Shock Resistance - Fujitsu ARROWS NX F-01K Instruction Manual

◆ CAUTION
・
Do not use a remodeled terminal. Using a remodeled
terminal violates the Radio Law/Telecommunications
Business Act.
The terminal is compliant with rules on the technical
standard conformance of specified wireless equipment
based on the Radio Law/Telecommunications Business Act,
and as a proof of it, the "Technical Compliance Mark
depicted on the electronic nameplate of the terminal. You
can check the electronic nameplate in the terminal as
follows.
From the Home screen,
phone]→[Auth]
If you remodel the terminal by removing its screws, your
certification of technical standard conformance becomes
invalid.
Do not use the terminal with its certification of technical
standard conformance invalid as it violates the Radio Law/
Telecommunications Business Act.
・
Be careful when you use the terminal while driving a car etc.
There is a penalty for holding or using the terminal while
driving.
However, absolutely necessary cases such as rescue of a
sick person or maintaining public's safety are exempted.
・
The FeliCa and NFC reader/writer functions are compliant
with the wireless standards of Japan. Check the regulations
of the country/region beforehand if you try to use the
function overseas.
・
Do not alter the basic software.
Repairs may be refused as a modification of software.
→[Settings]→[System]→[About
Waterproofness/Dustproofness,
shock resistance
F-01K has a waterproof equivalent to IPX5
well as a dustproof property equivalent to IP6X
condition that the slot cap is securely attached. Also, the
" is
terminal comprises the shock resistant structure which
*4
passed the test in accordance with United States Military
Standard.
*1
IPX5 means that a phone keeps functioning after applying a jet
flow of 12.5 L/min. from every direction from a distance of
approximately 3 m for at least 3 minutes using water nozzle in 6.3
mm inner diameter.
*2 For F-01K, IPX8 means that a phone keeps functioning after F-
01K is slowly submerged to depth of 1.5 m in static tap water at
room temperature, left there for 30 minutes and then taken out
(Camera function cannot be used under water).
*3
IP6X, a degree of protection, indicates that the terminal can
maintain its functionality to prevent dust particles from entering
into the terminal even when it has been shaken for 8 hours in an
apparatus containing dust particles 75 μm or less in diameter.
*4 Carried out a drop test compliant with MIL-STD-810G w/
Change1 Method 516.7-Shock set forth by the U.S. Department of
Defense.
Drop
Shock resistance
Waterproofness
(Immersion)
23
*1
and IPX8
Drop test from 1.22 meters height to
plywood (lauan) in 26 directions
Apply 40G shock from 6 directions 3
times
Immersion test at the depth of 1.5 meters
for 30 minutes
Contents/Precautions
*2
, as
*3
on the