Advertisement
4. Ethernet interface card setup
1) Check the Ethernet interface card version and select the right tool file.
version.
2)
Turn off
the printer and install Ethernet interface card.
3) Set a serial communication speed at the highest bps.
- SRP-350: 57,600bps
- SRP-370, 372, 350II: 115,200 bps
- SRP-270: 19,200 bps
4) Connect LAN cable to Ethernet interface card and turn on the printer.
- Use Direct cable (1:1 cable) to connect to HUB(Switch).
- Use Cross cable to connect to LAN card of computer.
5) Run "Configure_V3.xx.exe".
V3.0.0
www.samsungminiprinters.com
V3.x.x
is the latest
3
Advertisement
