Advertisement
1. Hardware
1) Interface version:
2) Difference of IFA-E and IFB-E: All features are same. Only a writing direction of model
name on metal bracket is reverse. It is because of reverse position of the main board of
SRP-350 and SRP-370.
2. Software
1) Configuration program:
- It is to set IP address and communication conditions.
2) Virtual driver (Option):
- It converts output of Serial (COM) port into output of Ethernet (TCP/IP) port.
- Applicable operating systems:
- Contact the sales rep in case you need. It is optional software.
Note: Use the designated tool file described below for the optimal operation according to each
interface version. This version is described on the metal bracket. Each tool file can be
downloaded from website, www.samsungminiprinters.com
Interface
Model
Version
name
IFA-E
V 3. x. x
IFB-E
V 2. x. x
RIF-350E
V 1. x. x
RIF-350E
3. Interface Card specification
1) Network interface: 10/100 Base-T
2) Protocol: TCP, UDP, IP, ICMP, ARP
3) IP mode: Static IP, DHCP (Dynamic Host Configuration Protocol)
4) RX buffer: 32 KByte
5) Flow control: RTS/CTS (hardware)
V3.0.0
V3.x.x
Configure_V3.xx.exe
VirtualCOM_V3.xx.exe
Win 98, 2000, XP, 2003 server
Applicable printers
SRP-350, 270, 350II
SRP-370, 372
SRP-350, 270
SRP-350, 270
All in one type
www.samsungminiprinters.com
Tool file
Ethernet_V3.x.zip
Ethernet_V2.0.zip
Ethernet_V1.3.zip
(auto detection)
Network
interface
10/100 Base-T
All in one
10 Base-T
10 Base-T
2
Advertisement
