Product Information - GE C30 Instruction Manual

CHAPTER 6: ACTUAL VALUES

6.6 Product information

6.6.1 Model information
ACTUAL VALUES  PRODUCT INFO  MODEL INFORMATION
 MODEL INFORMATION

The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.
The rear panel on the device contains similar information.
— UR devices with firmware 7.0x and above have three Ethernet ports that can be used on three
ETHERNET MAC ADDRESS
networks. The MAC address displays for port 1. The MAC address for port 2 is one higher. The MAC address for port 3 is one
higher than port 2. In redundant mode, the MAC addresses for ports 2 and 3 are the same as port 2.
6.6.2 Firmware revisions
6.6.2.1 Enhanced and standard front panels
ACTUAL VALUES  PRODUCT INFO  FIRMWARE REVISIONS
 FIRMWARE REVISIONS

C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
ORDER CODE LINE 1:

C30-A00-AAA-A0A-A0A-
ORDER CODE LINE 2:

A0A-A0A-A0A
ORDER CODE LINE 3:

ORDER CODE LINE 4:

SERIAL NUMBER:

ETHERNET MAC ADDRESS

000000000000
MANUFACTURING DATE:

OPERATING TIME:

0:00:00
CT/ VT ADVANCED DIAG

ACTIVE: No
LAST SETTING CHANGE:

1970/01/01 23:11:19
C30 Relay

REVISION: 7.6x
MODIFICATION FILE

NUMBER: 0
BOOT PROGRAM

REVISION: 7.01
FRONT PANEL PROGRAM

REVISION: 2.01
COMPILE DATE:

2016/09/15 04:55:16
PRODUCT INFORMATION
Range: standard GE order code format
Range: up to 20 alphanumeric characters
Range: up to 20 alphanumeric characters
Range: up to 20 alphanumeric characters
Range: standard GE serial number format
Range: standard Ethernet MAC address format
Range: YYYY/MM/DD HH:MM:SS
Range: operating time in HH:MM:SS
Range: Yes, No
Range: YYYY/MM/DD HH:MM:SS
Range: 0.00 to 655.35
Revision number of the application firmware.
Range: 0 to 65535 (ID of the MOD FILE)
Value is 0 for each standard firmware release.
Range: 0.00 to 655.35
Revision number of the boot program firmware.
Range: 0.00 to 655.35
Revision number of front panel program firmware.
Range: YYYY/MM/DD HH:MM:SS
Date and time when product firmware was built.
6
6-15