a. Open the handles on both sides of the storage drive bracket. Disconnect the cables from the storage
drive, and pull out the bracket with the storage drive.
Figure 69. Removing the type
b. Flex both sides of the bracket to remove the 2.5-inch storage drive from the bracket.
Note: If a 3.5-inch storage drive also is installed in the bracket, remove the 3.5-inch storage drive
first. See "3.5-inch storage drive in the storage drive bay" on page 89.
Figure 70. Removing the storage drive from the type
4. To install a 2.5-inch storage drive in a type
a. Open the handles on both sides of the storage drive bracket, and pull out the empty bracket.
94
P720 User Guide
1
storage drive bracket
1
bracket
1
bracket, do the following: