– No parts required Check the mower adjustment. Ignition key Hose coupling (not included with CE models) Operator's Manual Complete the setup. Engine Owner’s Manual (non-Toro engines) KeyChoice® key (blue) Connecting the Battery No Parts Required Procedure WARNING CALIFORNIA Proposition 65 Warning...
Installing the Rear Hitch Installing the Steering Wheel Parts needed for this procedure: Rear hitch Parts needed for this procedure: Bolt (5/16 x 1 inch) Steering wheel Locknut (5/16 inch) Top cover Locknut Procedure Rear cover 1. Install the bracket to the frame as shown in Screws Figure 2.
Page 4
Installing the Seat to the Seat Pan Machines Shipped in a Steel Crate Only Parts needed for this procedure: g027737 Shoulder bolt (seats without a detached cushion only) Figure 4 Seat (seats without a detached cushion only) 1. Steering-wheel cover 4.
B. Place the seat onto the seat pan, aligning the attached seat bolts with the front keyholes, and slide the seat back. C. Secure the seat to the seat pan using 2 hex Installing the Seat bolts and 2 washers (Figure Assembly Parts needed for this procedure:...
Installing the Grass Deflector Parts needed for this procedure: Grass deflector (if not installed) Procedure g027695 g027695 If the grass deflector is not installed, remove it from Figure 9 the packaging and install it onto the mower deck. Refer to your Operator’s Manual for the correct procedure to install the grass deflector.
Completing the Setup Parts needed for this procedure: Ignition key Hose coupling (not included with CE models) Operator's Manual Engine Owner’s Manual (non-Toro engines) KeyChoice ® key (blue) Procedure Checking the Tire Pressure Check the front and rear tires for proper inflation;...