Toro Z17-44 Setup Instructions
Riding mower
Hide thumbs
Also See for Z17-44:
- Operator's manual (40 pages) ,
- Operator's manual (40 pages) ,
- Service manual (118 pages)
Advertisement
Quick Links
Z17-44
TimeCutter Z Riding Mower
Model No. 74401—Serial No. 220000001 and Up
Loose Parts
Note: Use the chart below to verify that all parts have been shipped.
Description
Bolt, 1/4 x 3/4 in.
Washer, 1/4 in.
Nut, 1/4 in.
Seat
Knob
Flat washer, 5/16 in.
Left-hand control lever
Right-hand control lever
Bolt, 3/8 x 1 in.
Curved washer, 3/8 in.
Key
CE certificate
Operator's Manual
Engine Operator's Manual
Registration card
2001 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Qty.
Use
2
2
Installing the battery
2
1
2
Installing the seat
2
1
1
Installing the motion control levers
4
4
1
1
1
Read before operating the machine.
1
1
Fill out and return to Toro.
1
Form No. 3327-130
Setup Instructions
All Rights Reserved
Printed in the USA
Advertisement
Related Manuals for Toro Z17-44
Summary of Contents for Toro Z17-44
- Page 1 Curved washer, 3/8 in. CE certificate Operator’s Manual Read before operating the machine. Engine Operator’s Manual Registration card Fill out and return to Toro. 2001 by The Toro Company 8111 Lyndale Avenue South All Rights Reserved Bloomington, MN 55420-1196 Printed in the USA...
- Page 2 Activating the Battery Warning Bulk electrolyte with 1.260 specific gravity must be purchased from a local battery supply outlet. Charging the battery produces gasses that can explode. Danger Never smoke near the battery and keep sparks and flames away from battery. Battery electrolyte contains sulfuric acid which is a deadly poison and causes severe burns.
- Page 3 4. Slide the shoulder bolts on the bottom of the seat into the slots on the seat support (Fig. 5). Secure the seat to the seat support with the flat washers and knobs removed in step 2 (Fig. 5). m–5215 Figure 3 1.