Table of Contents
Advertisement
5.5.3 TWO CALLS: "OPTIONS" MENU
Press
to access to call related operations menu:
Actions
Item
AutoDtmf
To enter a DTMF string and send it, available only if the call is active:
Swap
To swap the calls (Same action as a press on the
Join
To make a conference call. The active and held calls are joined together. Each party can then hear
all other parties. See conference calls management for details.
See below for a screens sequence example.
Same actions as a press on
Transfer
To make a transfer between the two connected calls. See description below.
Same actions as a press on
Mute |Unmute
To Mute or unmute the micro (same actions as a long press on the
End held
To end the held connected call. A "Call Ended " screen is displayed during 3 seconds and can be
erased by a press on any softkey. After that, the display returns to the call connected state, related
to the call being active.
Same actions as a press on
End active
To end the active connected call. A "Call Ended " screen is displayed during 3 seconds and can be
erased by a press on any softkey. After that, the display returns to the call connected state, related
to the call being held. The remaining call stays in held state.
Same actions as a press on
When ending the active call, the held call is automatically retrieved (no need to make a manual
retrieve operation)
End all
Allows to end the connected call (Same actions as a press on the
.
CONFIDENTIAL
- This item allows you to enter a DTMF string and send it to the remote party,
- The string can be entered directly or can be selected from the memories,
- A waiting screen is displayed during the DTMF transmission,
- The DTMF string is sent to the current active call remote party
3
SEND
4
SEND
0 SEND
1
1 SEND
Mitsubishi Electric
Function
key
SEND
key)
or
1
2 SEND
key).
END
Page 65/102
Advertisement
Table of Contents
