Table of Contents
Advertisement
4.15 PASSWORD ENTRY
4.15.1 SCREEN EXAMPLE
Enter PIN:
Password entry screen:
****|
Ok
Clear
4.15.2 KEY USAGE
Normal press
0
1
2..9
0
1
2..9
Ok
Exit
Clear
softkey
softkey
softkey
Entry
Exit to
Clear last
validation
parent menu
digit
/ process
4.15.3 DESCRIPTION
The password entry mode is activated when entering passwords: Phone lock, PIN, PIN2, PUK; PUK2, Call
barring password.
The entry is displayed left justified. A vertical line cursor indicates the entry point. No initial entry is possible.
"*" are echoed when entering digits.
Depending on the circumstances, the right softkey may have an
process, otherwise the softkey has no label associated with.
The left softkey becomes
Ok
As the
key has to be allowed for the PIN validation, it is also allowed for all passwords validation in addition
#
to the
Ok
softkey.
During the mobile initialisation phase, the user must be able to start an emergency call set-up even at password
entry. As a consequence if the user validates a SOS phone number followed by
When the call is ended, the password editor will be reached back with an empty entry.
4.16 DIALLING IN MENUS
Dialling in the main menu structure is possible at any moment except:
• In terminal operations menus, that require an answer for a precise operation,
• In the options menus.
Due to
*
and
#
keys usage for menu scrolling, the dialled number cannot starts with one of these two characters.
When dialling in menus is performed, the current menu position is lost and dialling is made as for a normal
dialling from the Idle screen.
.
CONFIDENTIAL
#
Entry
validation
SEND key
softkey
Emergency
call / Error
only when the minimum password length has been reached.
Mitsubishi Electric
Long press
0
1
2..9
0
1
2..9
Ok
Exit
Clear
softkey
softkey
-
Exit to Idle
Erases
whole entry
label on empty entry, allowing leaving the
Exit
SEND
#
Entry
validation
, a SOS call is initiated.
Page 41/102
Advertisement
Table of Contents
