Making A Call From The Idle Screen - Mitsubishi Electric M4 Social User's Operation Manual

5.1.1 MAKING A CALL FROM THE IDLE SCREEN

5.1.1.1 D
IALLING A NUMBER
Idle screen:
Use the numeric keys
"Idle screen"
International calls can be made using the local international access code or by using the
By a long press on the key, the "+" symbol will be displayed; this shall be followed by the country
Names Menu
code and the subscriber number
"+44712251637"
During a telephone number input the
the telephone number sequence. When the
inserted.
Dialling screen:
Clear
+44712251637
Store
The entry is displayed in double height characters if the number can hold on a line.
Store Clear
Sends the call
SEND
A telephone number (including « P » symbols) can be up to 46 digits in length and one "+" for
international Dialling. Digits after the maximum number of digits will not be accepted
Calling screen:
John
An animation shows the progress of the call
→
The "Off-hookl." icon is switched on
Press
L2
The dialled number is compared with the numbers stored in all memories. If a match is found,
the corresponding name is displayed instead of the phone number.
No line is indicated, so the call is set-up from the line 1, otherwise the line 2 is indicated
John Calling screen:
John is alerted
→ The ringing tone is heard in the ear-piece. When the call is connected, the connected call screen
(with the call timer) is displayed.
L2
"John answers"
Connected call screen:
L2
John is connected
John
The micro is switched on automatically.
00:00:10
Names Menu
5.1.1.2 L
IST OF INTERNATIONAL COUNTRY CODES FOR DIALLING
If the international prefix "+" is dialled as first character, the user is proposed an access to a list of international
country codes, allowing a more reliable entry mode. Example:
L2 Idle screen:
.
CONFIDENTIAL
to , and
0 9 *
allows to erase the last character
allows to store the number in memories
to terminate the call
END
Mitsubishi Electric
to enter the desired telephone number.
#
key also can be used to enter « Pause » characters in
*
key is held down, the « P » symbol will be
*
key.
*
Page 43/102