Table of Contents
Advertisement
Program Event Indicators
Program event indicators appear in the display to let you
know what part of your current program is active.
• In Program Mode, MORN, DAY, EVE or NIGHT will appear.
When the program event indicator is flashing, your program
has been temporarily bypassed and will resume at the
next scheduled event.
NOTE: You will not see a program event indicator while in
HOLD or Non-Programmable Mode.
Resetting the Thermostat
This thermostat provides you with a reset button that will
erase all of your user settings and programming.
The reset feature does not affect the Installer Settings.
To reset the thermostat, use a small object such as a
tooth pick or paperclip and gently press the button located
inside the small hole on the front of the thermostat housing
labeled "RESET ".
NOTE: You cannot reset the thermostat if it is locked.
Program Event
Indicator
Reset
Button
21
FAN AUTO
FAN AUTO
DAY/TIME
User Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 7205 and is the answer not in the manual?
Questions and answers
Hi our heating system will not run on heat only, it will only work on emergency heat. What is wrong with our system
The Braeburn 7205 heating system may only run on emergency heat due to incorrect wiring or configuration. Possible causes include:
1. Incorrect Wiring – The thermostat may not be wired properly for a heat pump system. Check the wiring connections according to the installation guide.
2. Improper System Settings – The thermostat might be set to emergency heat mode in the installer settings. Verify and adjust the settings as needed.
3. Heat Pump Malfunction – If the heat pump is not functioning properly, the system may default to emergency heat.
4. Power Issues – Ensure the thermostat has a stable 24V AC power supply, as power issues can affect system operation.
Check the installation guide for proper wiring and settings to resolve the issue.
This answer is automatically generated