HP server rx4610 Service Manual page 41

Chapter 4
This first example works regardless of your current working directory. The software uses the default
configuration file and creates a default log file.
\efi\intel\service\diagnostics\fielddiags
Example 2:
This next example assumes your working directory is "\efi\intel" and specifies a custom configuration file
named "MYCONFIG.CFG" located in a directory named "mydir":
service\diagnostics\fielddiags cfg diagnostics\mydir\myconfig
Example 3:
This last example assumes your working directory is in the same directory as the test software and you are
using the custom configuration file used in the previous example. This example also creates a log file named
"MYLOGFILE.LG1" in a directory named "mydir":
fielddiags log ..\mydir\mylogfile.lg1 cfg ..\mydir\myconfig
Understanding the General User Interface
The rx4610 Platform Diagnostic Tests use a single screen from which you can choose execution options,
enable or disable tests for execution, and define test parameters. The screen consists of four areas from top
to bottom:
•
Execution Options
•
Test Selection and Results
•
Test Parameters
•
User Interface Help
The keys used to navigate the application are listed in Table 4-1 below.
Table 4-1. Navigation Keys
Key
↑ and ↓
← and →
<Enter>
<F1>
<ESC>
<Space Bar>
Description
Navigate vertically through all areas of the screen except for the
User Interface Help area. During navigation, items that you can
modify become highlighted.
Navigate horizontally through the Execution Options and the Test
Parameters areas. During navigation, items that you can modify
become highlighted.
Causes highlighted actions to occur. Also, causes data to be
entered if you are viewing a dialog box.
Causes on-line help to appear for a highlighted test.
Dismisses on-line help and dialog boxes.
Enable or disable a test.
Diagnostics
33