HP server rx4610 Service Manual page 128

Chapter 6
8. Install the memory board into the bottom half of the Processor/Memory Complex as described in
"Removing and Installing Memory Boards."
9. Install the triple beam and metal baffle.
10. Carefully turn the Processor/Memory Complex over so that you can work on the topside.
11. Install the processors and power pods into the top half of the Processor/Memory Complex as
described in "Installing an Additional Processor."
12. Install the triple beam and metal baffle.
13. Install the memory board into the top half of the Processor/Memory Complex as described in
"Removing and Installing Memory Boards."
14. Install the Processor/Memory Complex into the server as described in "Installing the
Processor/Memory Complex."
Replacing Parts
120