Flash Memory Recovery Mode - Fujitsu D3320 PRIMERGY BX2560 M2 Reference Manual

Ê Check the settings in the BIOS setup utility. If necessary, reconfigure the
settings again.
10.1

Flash Memory Recovery Mode

Ê Prepare a bootable USB stick or USB CDROM as described in section Flash
BIOS Update with a USB stick.
Ê Turn off the system.
Ê Remove the server blade from the system unit and put a jumper on the
"Recovery" (RCV) jumper on the system board.
I
Please refer to Upgrade and Maintenance Manual for detailed jumper
settings on the system board.
– Install the server blade in the system unit.
– Connect the USB stick or USB CDROM which contains the BIOS image
(S2LFBIOS.ROM) in the root directory to the system unit.
– Boot the system.
The system will start the Recovery Mode automatically.
I
The system will show a black screen if there is no S2LBIOS.ROM image
in USB stick or CDROM.
BX2560 M2
D3320 - BIOS Setup Utility
Flash BIOS Update
73