Backyard Discovery READY SHED Manual
  1. Manuals
  2. Brands
  3. Backyard Discovery Manuals
  4. Outdoor Furnishing
  5. READY SHED
  6. Manual
Backyard Discovery READY SHED Manual

Backyard Discovery READY SHED Manual

8x8 barn shed disassembly
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
READY SHED
8X8 BARN SHED
DISASSEMBLY
MODEL: # 817220010
READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING CONSTRUCTION.
Manufacturer:
Backyard Discovery
3305 Airport Drive
Pittsburg, KS 66762
1-800-856-4445
Save this assembly manual for future reference in the event that
you need to order replacement parts.
INS- 817220010-A-BARN SHED DISASSEMBLY-ENG 4-13-17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the READY SHED and is the answer not in the manual?

Questions and answers

Related Manuals for Backyard Discovery READY SHED

Summary of Contents for Backyard Discovery READY SHED

  • Page 1 READY SHED 8X8 BARN SHED DISASSEMBLY MODEL: # 817220010 READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING CONSTRUCTION. Manufacturer: Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 1-800-856-4445 Save this assembly manual for future reference in the event that you need to order replacement parts.
  • Page 2 STOP! DO NOT RETURN THIS PRODUCT TO STORE! If you have questions or concerns, please call 800-856-4445 email customerserv@backyarddiscovery.com IMPORTANT! READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING. BEFORE YOU BEGIN • SAFETY FIRST Your safety is what matters, follow the instructions fully to ensure it gets dissassembled correctly and safely.
  • Page 3 DISASSEMBLY TOOLS REQUIRED • Drill • Phillips Bit Driver OTHER TOOLS WE SUGGEST • Utility Knife • Gloves • 6' Ladder...
  • Page 4 PARTS BEING REMOVED - 5/8" OSB FLOOR SHEATHING - W4L07734 5/8"x16"x92" - FLOOR JOIST - W4L07662 1 1/2"x3 1/2"x89" TREATED DON'T SKIP ANY STEPS This crate has been designed to keep it's parts from being damaged and from falling over. Skipping steps could cause parts to fall and land on you or cause damage to your shed or surrounding structures.
  • Page 5 PARTS BEING REMOVED - FLOOR JOIST - W4L07662 1 1/2"x3 1/2"x89" TREATED (1) RP1 - ROOF PANEL - W2A02123 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. TOP VIEW REMOVE REMOVE SCREW...
  • Page 6 PARTS BEING REMOVED (1) WP5 - UNIVERSAL RIGHT WALL PANEL - W2A02122 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. REMOVE SCREW (2 PLS) TOP VIEW REMOVE...
  • Page 7 PARTS BEING REMOVED (1) WP5 - UNIVERSAL RIGHT WALL PANEL - W2A02122 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. TOP VIEW REMOVE REMOVE SCREW (2 PLS)
  • Page 8 PARTS BEING REMOVED (1) WP4 - UNIVERSAL LEFT WALL PANEL - W2A02121 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. TOP VIEW REMOVE REMOVE SCREW (2 PLS)
  • Page 9 PARTS BEING REMOVED (1) WP4 - UNIVERSAL LEFT WALL PANEL - W2A02121 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. TOP VIEW REMOVE REMOVE 2 SCREWS...
  • Page 10 PARTS BEING REMOVED (1) WP3 - FRONT CENTER WALL PANEL - W2A02120 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. REMOVE SCREW (2 PLS) REMOVE SCREW (2 PLS) TOP VIEW REMOVE...
  • Page 11 PARTS BEING REMOVED (1) WP2 - REAR CENTER WALL PANEL - W2A02119 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. TOP VIEW REMOVE CAUTION LOOSE PARTS BEHIND, MOVE WITH CAUTION.
  • Page 12 PARTS BEING REMOVED - LEVELING BLOCK - W4L07757 - LEVELING BLOCK - W4L07756 1"x5 1/2"x6" 1 1/2"x5 1/2"x6" SHINGLES - 2" CONCRETE BLOCK - CB000002 - 4" CONCRETE BLOCK - CB000001 •Only remove item's shown in the current step, do not skip foward or take out any additional parts until instructed to. STOP ONLY REMOVE LOOSE PARTS AND MOVE TO NEXT STEP.
  • Page 13 PARTS BEING REMOVED (2) LP1 - LOFT PANEL - W2A02124 - FLOOR JOIST - W4L07662 1 1/2"x3 1/2"x89" TREATED •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. TOP VIEW REMOVE REMOVE SCREW...
  • Page 14 PARTS BEING REMOVED - FLOOR JOIST - W4L07662 1 1/2"x3 1/2"x89" TREATED (1) RP1 - ROOF PANEL - W2A02123 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. TOP VIEW REMOVE REMOVE SCREW...
  • Page 15 PARTS BEING REMOVED - DOOR DRIP BOARD - W4L07675 3/4"x1"x46 3/4" (20x24x1187) - FASCIA BOARD - W4L07672 5/8"x2 3/8"x87 1/4" (16x60x2216) (1) RP1 - ROOF PANEL - W2A02123 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. CAUTION LOOSE PARTS BEHIND, MOVE WITH CAUTION.
  • Page 16 PARTS BEING REMOVED - 7/16" OSB GABLE BRACE - W4L07667 7/16"x6 1/8"x11" TREATED - ANGLED ROOF TRIM - W4L07666 - FILLER BOARD - W4L07701 5/8"x3 3/8"x36" (16x86x914) 1"x3 3/8"x21 3/8" (24x86x543) - SUPPORT BLOCK - W4L07669 1 1/2"x3 1/2"x3 1/2" - SIDE VERTICAL TRIM - W4L07665 - VERTICAL TRIM - W4L07674 5/8"x2 3/8"x44 1/2"...
  • Page 17 PARTS BEING REMOVED - FLOOR JOIST - W4L07662 1 1/2"x3 1/2"x89" TREATED •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. REMOVE SCREW (3 PLS) REMOVE SCREW (3 PLS)
  • Page 18 PARTS BEING REMOVED (1) RP1 - ROOF PANEL - W2A02123 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. CAUTION LOOSE PARTS BEHIND, MOVE WITH CAUTION. TOP VIEW REMOVE REMOVE SCREW (2 PLS)
  • Page 19 PARTS BEING REMOVED - LEVELING BLOCK - W4L07757 - LEVELING BLOCK - W4L07756 1"x5 1/2"x6" 1 1/2"x5 1/2"x6" - 4" CONCRETE BLOCK - CB000001 SHINGLES - 5/8" OSB FLOOR SHEATHING - W4L07664 - 2" CONCRETE BLOCK - CB000002 5/8"x43"x92" CAUTION LOOSE PARTS, MOVE WITH CAUTION.
  • Page 20 PARTS BEING REMOVED - 4 x 4 RUNNER - W4L07670 3 3/4"x3 3/4"x92" TREATED - 5/8" OSB FLOOR SHEATHING - W4L07733 5/8"x31 7/8"x92" •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. CAUTION REMOVING BOARD WILL REDUCE STABILTY.
  • Page 21 •Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to. STOP LAY DOWN REMAINING PARTS BEFORE MOVING FOWARD. REMOVE REMOVE 8 SCREWS ON EACH SIDE AND SEPARATE A-FRAME STRUCTURE. REMOVE...
  • Page 22 PARTS BEING REMOVED - RIM JOIST - W4L07661 (2) WP1 - SIDE WALL PANEL - W2A02156 1 1/2"x3 1/2"x91 1/4" TREATED NOTE: ONLY ONE WALL PANEL IS SHOWN. SO YOU WILL DO THESE STEPS TWICE. REMOVE SCREW (4 PLS) REMOVE SCREW (1 PLS) LEAVE THESE PANELS TOGETHER.
  • Page 23 READY SHED 8x8 BARN SHED MODEL: # 817220010 READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING CONSTRUCTION. Manufacturer: Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 1-800-856-4445 Save this assembly manual for future reference in the event that you need to order replacement parts.
  • Page 24 STOP! DO NOT RETURN THIS PRODUCT TO STORE! If you have questions or concerns, please call 800-856-4445 email customerserv@backyarddiscovery.com IMPORTANT! READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING CONSTRUCTION. BEFORE YOU BEGIN • BUILDING RESTRICTIONS AND APPROVALS Be sure to check with local building department and homeowners association for specific restrictions and/or requirements before building.
  • Page 25 Caring For Your Structure Wood Structures (Smart Panel) • To prevent leaking and premature aging of your shed, we recommend wood structures be thoroughly prepared before treatment. All joints between wall siding boards, window trim, door trim, corner boards, soffits, fascias, rake trim, vents, and naturally occurring hairline cracks in knots must be properly sealed with high quality caulking prior to treatment.
  • Page 26 ASSEMBLY TOOLS REQUIRED • Hammer • Drill with 3/8" Bit & Phillips Head Driver OTHER TOOLS WE SUGGEST • 1/8" Allen Wrench • 4' Level • 6' Ladder • Square • Safety Glasses • Gloves • Tape Measure • Pencil...
  • Page 27 Basic Setup Dimensions Place the shed on level ground, not less than 3 ft [1 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 7'-10" O.A. 22.5° 67.5° 7'-10 1/4" 8'-2 1/8"...
  • Page 28 Parts Identification Wood Components (NOT TO SCALE) - RIM JOIST - W4L07661 1 1/2"x3 1/2"x91 1/4" TREATED - FLOOR JOIST - W4L07662 1 1/2"x3 1/2"x89" TREATED - 5/8" OSB FLOOR SHEATHING - W4L07734 5/8"x16"x92" - 5/8" OSB FLOOR SHEATHING - W4L07733 5/8"x31 7/8"x92"...
  • Page 29 Parts Identification Wood Components (NOT TO SCALE) - 7/16" OSB GABLE BRACE - W4L07667 7/16"x6 1/8"x11" TREATED - SUPPORT BOARD - W4L07668 5/8"x3 3/8"x22 1/8" (16x86x562) - SUPPORT BLOCK - W4L07669 1 1/2"x3 1/2"x3 1/2" - 4 x 4 RUNNER - W4L07670 3 3/4"x3 3/4"x92"...
  • Page 30 Parts Identification Wall Panels (2) WP1 - SIDE WALL PANEL - W2A02156 (1) WP2 - REAR CENTER WALL PANEL - W2A02119...
  • Page 31 Parts Identification Wall Panels (1) WP3 - FRONT CENTER WALL PANEL - W2A02120 (2) WP5 - UNIVERSAL RIGHT (2) WP4 - UNIVERSAL LEFT WALL PANEL - W2A02122 WALL PANEL - W2A02121 (4) RP1 - ROOF PANEL - W2A02123 (2) LP1 - LOFT PANEL - W2A02124...
  • Page 32 Parts Identification Shingle Components (NOT TO SCALE) (42) (12) FULL - STARTER SHINGLE 7.125 x 36 FULL - ASPHALT SHINGLE 12 x 36 1 - ASPHALT SHINGLE 12 x 30 (14) - STARTER SHINGLE 7.125 x 22.25 2 - ASPHALT SHINGLE 12 x 22.25 (12) 3 - ASPHALT SHINGLE 12 x 28.25 - SHINGLE CAP 5 x 11.75...
  • Page 33 Parts Identification Hardware (17) BN - SCREW PFH 8x1 - H100085 (17) CY - SCREW PWH 8x5/8 - H100128 (26) BQ - SCREW PFH 8x1 1/4 - H100087 (102) BP - SCREW PFH 8x1 1/2 - H100086 - 8x1 PFH SCREW BLK - WC - H100445 (44) BS - SCREW PFH 8x1 3/4 - H100089 VT - SCREW PFH 8x1-1/2 BLK - H100200...
  • Page 34 Parts Identification Accessories (NOT TO SCALE) - VENT (8x16) - A4M00771 MX - BYD ID TAG (MEDIUM) WITHOUT AGES - A100240...
  • Page 35 FLOOR FRAME - RIM JOIST - W4L07661 1 1/2"x3 1/2"x91 1/4" TREATED - FLOOR JOIST - W4L07662 (32) - SCREW T-25 9x3 - H100578 1 1/2"x3 1/2"x89" TREATED - 4 x 4 RUNNER - W4L07670 3 3/4"x3 3/4"x92" TREATED • IMPORTANT: On a level surface, make sure the floor frame is square before moving on to next step.
  • Page 36 FLOOR SHEATHING - 5/8" OSB FLOOR SHEATHING - W4L07733 5/8"x31 7/8"x92" (81) - SCREW T-25 9x2 - H100579 - 5/8" OSB FLOOR SHEATHING - W4L07664 5/8"x43"x92" - 5/8" OSB FLOOR SHEATHING - W4L07734 5/8"x16"x92" • Bring sheathing to square before securing with 2" torx drive fasteners. 5/8"...
  • Page 37 FLOOR LEVELING OPTIONS There are multiple ways to level your floor frame. Our recommended leveling method is shown below. INCLUDED LEVELING MATERIALS •2 pcs - 2x6x6 Treated Wood Block •2 pcs - 5/4x6x6 Treated Wood Block •1 pcs - 4x8x16 Concrete Block •2 pcs - 2x8x16 Concrete Block •2 pcs - Asphalt Shingles (Can be cut into 4"...
  • Page 38 RIGHT SIDE WALL INSTALLATION - SCREW T-25 9x3 - H100578 (1) WP1 - SIDE WALL PANEL - W2A02156 NOTE SIDING JOINT. IMPORTANT: Make sure to mate the wall panel siding with joists. DO NOT LEAVE ANY GAP BETWEEN THE PANEL SIDING AND ANY OF THE FLOOR JOIST.
  • Page 39 FRONT RIGHT WALL INSTALLATION - SCREW T-25 9x3 - H100578 (1) WP5 - UNIVERSAL RIGHT WALL PANEL - W2A02122 • Attach (WP5) front right side wall to (WP1) right side wall securing with 3" torx drive fasteners, approximately 3-1/2" from both the top and bottom plates.
  • Page 40 FRONT CENTER WALL INSTALLATION Q - BOLT WH 5/16x3 1/4 - H100017 BG - T-NUT 5/16 - H100074 V - BOLT WH 5/16x5 - H100022 (1) WP3 - FRONT CENTER WALL PANEL - W2A02120 AC - WASHER LOCK EXT 8x19 - H100030 WASHER LOCK EXT 8x19 (4 PLCS) BOLT WH 5/16x3 1/4...
  • Page 41 FRONT LEFT WALL INSTALLATION Q - BOLT WH 5/16x3 1/4 - H100017 BG - T-NUT 5/16 - H100074 V - BOLT WH 5/16x5 - H100022 (1) WP4 - UNIVERSAL LEFT WALL PANEL - W2A02121 AC - WASHER LOCK EXT 8x19 - H100030 - SCREW T-25 9x3 - H100578 BOLT WH 5/16x3 1/4 (1 PLC)
  • Page 42 LEFT SIDE WALL INSTALLATION - SCREW T-25 9x3 - H100578 (1) WP1 - SIDE WALL PANEL - W2A02156 • Attach (WP1) Side Wall Assembly by securing with 3" torx drive fasteners as shown below. SCREW T-25 9x3 (4 PLCS) SCREW T-25 9x3 (3 PLCS) NOTE: MAKE SURE SCREWS EITHER GO INTO RIM JOISTS...
  • Page 43 REAR LEFT WALL INSTALLATION - SCREW T-25 9x3 - H100578 (1) WP5 - UNIVERSAL RIGHT WALL PANEL - W2A02122 SCREW T-25 9x3 (3 PLCS) SCREW T-25 9x3 (1 PLC) IMPORTANT: Make sure to mate the wall panel siding with joists. DO NOT LEAVE ANY GAP BETWEEN THE PANEL SIDING AND...
  • Page 44 REAR CENTER WALL INSTALLATION BG - T-NUT 5/16 - H100074 Q - BOLT WH 5/16x3 1/4 - H100017 AC - WASHER LOCK EXT 8x19 - H100030 (1) WP2 - REAR CENTER WALL PANEL - W2A02119 • IMPORTANT: Make sure to mate the wall panel siding with joists.
  • Page 45 REAR RIGHT WALL INSTALLATION Q - BOLT WH 5/16x3 1/4 - H100017 BG - T-NUT 5/16 - H100074 (1) WP4 - UNIVERSAL LEFT WALL PANEL - - SCREW T-25 9x3 - H100578 W2A02121 AC - WASHER LOCK EXT 8x19 - H100030 BOLT WH 5/16x3 1/4 (4 PLCS) SCREW T-25 9x3...
  • Page 46 WALL PANEL FASTENERS (22) - SCREW T-25 9x2 - H100579 - SCREW PFH 8x2 BLK - H100391 -OPTIONAL- For your convenience we recommend that the painting be done at this time. See "PAINT" on page 2 of this manual. SCREW T-25 9x2 (6 PLCS) SCREW T-25 9x2 (6 PLCS)

  • Page 47: Table Of Contents

    RIGHT ROOF PANELS INSTALLATION J - BOLT WH 5/16x1 3/4 - H100011 AC - WASHER LOCK EXT 8x19 - H100030 (2) RP1 - ROOF PANEL - W2A02120 M - BOLT WH 5/16x2 1/2 - H100014 BG - T-NUT 5/16 - H100074 BS - SCREW PFH 8x1 3/4 - H100089 - FILLER BOARD - W4L07701 1"x3 3/8"x21 3/8"...

  • Page 48: Rp1 - Roof Panel - W2A02120

    LEFT ROOF PANELS INSTALLATION J - BOLT WH 5/16x1 3/4 - H100011 AC - WASHER LOCK EXT 8x19 - H100030 (2) RP1 - ROOF PANEL - W2A02120 M - BOLT WH 5/16x2 1/2 - H100014 BG - T-NUT 5/16 - H100074 BS - SCREW PFH 8x1 3/4 - H100089 - FILLER BOARD - W4L07701 1"x3 3/8"x21 3/8"...

  • Page 49: Bq - Screw Pfh 8X1 1/4 - H100087

    GABLE BRACES (36) BP - SCREW PFH 8x1 1/2 - H100086 - 7/16" OSB GABLE BRACE - W4L07667 7/16"x6 1/8"x11" TREATED 7/16" OSB GABLE BRACE (6 PLCS) SCREW PFH 8x1 1/2 (36 PLCS)

  • Page 50: (2 Plcs)

    FRONT TRIM BOARDS - FASCIA BOARD - W4L07672 - SIDE VERTICAL TRIM - W4L07665 5/8"x2 3/8"x87 1/4" (16x60x2216) 5/8"x2 3/8"x44 1/2" (16x60x1130) - VERTICAL TRIM - W4L07674 - ANGLED ROOF TRIM - W4L07666 (34) BP - SCREW PFH 8x1 1/2 - H100086 5/8"x3 3/8"x44 1/2"...
  • Page 51 REAR TRIM BOARDS - SIDE VERTICAL TRIM - W4L07665 5/8"x2 3/8"x44 1/2" (16x60x1130) - VERTICAL TRIM - W4L07674 5/8"x3 3/8"x44 1/2" (16x86x1130) (24) BP - SCREW PFH 8x1 1/2 - H100086 - ANGLED ROOF TRIM - W4L07666 5/8"x3 3/8"x36" (16x86x914) •...
  • Page 52 VENT INSTALLATION - DOOR DRIP BOARD - W4L07675 3/4"x1"x46 3/4" (20x24x1187) CY - SCREW PWH 8x5/8 - H100128 BP - SCREW PFH 8x1 1/2 - H100086 - VENT (8x16) - A4M00771 • The vent (8x16) is installed over the 4-1/2" holes in the front and rear center panels.
  • Page 53 DOOR COMPONENTS - 8x1 PFH SCREW BLK - WC - H100445 - SPRING LATCH ASSEMBLY - A4M00774 VT - SCREW PFH 8x1-1/2 BLK - H100200 - LOCKING DOOR HANDLE SPRING LATCH INSTALLATION PREFERRED HANDLE INSTALLATION • The spring latches should attach to the door stop on •...
  • Page 54 FULL - STARTER SHINGLE 7.125 x 36 (11) - 7/8" ROOFING NAIL GALV. - H100446 - STARTER SHINGLE 7.125 x 22.25 STARTER SHINGLES USE THESE STEPS FOR BOTH SIDES • WORK LEFT TO RIGHT WHEN INSTALLING STARTER SHINGLES. LEFT SIDE RIGHT SIDE START HERE FULL STARTER...
  • Page 55 FULL - ASPHALT SHINGLE 12 x 36 1 - ASPHALT SHINGLE 12 x 30 - 7/8" ROOFING NAIL GALV. - H100446 • Familiarize yourself with a 3-Tab Shingle. SHINGLE NAIL PATTERN Notch Notch Tar / Sealing Strip NAIL ON TOP EDGE OF SEAL STRIP. 1"...
  • Page 56 FULL (19) FULL - ASPHALT SHINGLE 12 x 36 2 - ASPHALT SHINGLE 12 x 22.25 (141) - 7/8" ROOFING NAIL GALV. - H100446 1 - ASPHALT SHINGLE 12 x 30 3 - ASPHALT SHINGLE 12 x 28.25 FINISH SHINGLE COURSES •...
  • Page 57 (38) - 7/8" ROOFING NAIL GALV. - H100446 - RIDGE CAP 9.25 (17) - RIDGE CAP 12 - SHINGLE CAP 5 x 11.75 RIDGE CAP INSTALLATION • IF NEEDED BEND EXCESS SHINGLES OVER PEAK BEFORE STARTING ON RIDGE CAPS. • INSTALL FIRST RIDGE CAP FLUSH WITH SHINGLES BELOW AS SHOWN. START AT THE FRONT OF YOUR SHED AND WORK TOWARDS THE REAR.

  • Page 58: Flush

    SHINGLES - RIDGE CAP • Install ridge caps 5" back, as shown. RIDGE CAP 12 (2 PLCS) RIDGE CAP 12 FRONT OF SHED. (1 PLCS) REPEAT THIS STEP NOTE: NAILS ARE COVERED BY NEW RIDGE CAPS. (15 TIMES) • Install last ridge cap 5" back as shown, it should be flush with the back of your shed.

  • Page 59: Screw Pfh 8X1

    OPTIONAL - LOFT CONFIGURATION (16) BN - SCREW PFH 8x1 - H100085 (2) LP1 - LOFT PANEL - W2A02124 - SUPPORT BOARD - W4L07668 BS - SCREW PFH 8x1 3/4 - H100089 5/8"x3 3/8"x22 1/8" (16x86x562) WE SUGGEST YOU LEVEL LOFT PANELS BEFORE SECURING TO ROOF RAFTERS.
  • Page 60 OPTIONAL - SHELF CONFIGURATION - SUPPORT BLOCK - W4L07669 (12) BV - SCREW PFH 8x2 1/4 - H100091 1 1/2"x3 1/2"x3 1/2" SECURE SUPPORT (6) BLOCKS IN DESIRED HEIGHT LOCATIONS NO HIGHER THAN 43". SCREW PFH 8x2 1/4 (12 PLCS)
  • Page 61 OPTIONAL - SHELF CONFIGURATION CONTINUED (2) LP1 - LOFT PANEL - W2A02124 (32) BS - SCREW PFH 8x1 3/4 - H100089 - SUPPORT BOARD - W4L07668 5/8"x3 3/8"x22 1/8" (16x86x562) SCREW PFH 8x1 3/4 (4 PLCS) SUPPORT BOARD (2 PLCS) ASSEMBLE (2) SHELVES BEFORE INSTALLATION.
  • Page 62 BRANDING PLATE INSTALLATION CY - SCREW PWH 8x5/8 - H100128 MX - BYD ID TAG (MEDIUM) WITHOUT AGES - A100240 SCREW PWH 8x5/8 (4 PLCS) BYD ID TAG (MEDIUM) WITHOUT AGES...
  • Page 63 Post Installation FAQs Shingles Aren’t Laying Flat This is a normal condition. Please allow a minimum of (2) full weeks of temperatures above 60º F for shingles to seal. Subfloor Sheathing Small gaps between subfloor sheathing sheets are a normal aspect of construction. You may caulk gaps to fill and seal them if you wish.
  • Page 64 Refer to the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition, Backyard Discovery will replace any parts within 30 days from date of purchase found to be missing from or damaged in the original packaging.

This manual is also suitable for:

817220010

Table of Contents