Table of Contents
Advertisement
Components on the CPV5300
Connecting to and Configuring Headers
3
!
Warning
!
Caution
CPU Speed Settings
3-6
The CPV5300 provides several headers for attaching peripheral devices.
Before installing the CPV5300, you may want to connect your peripheral
cables to the headers. Headers are circuit board mounted components, as
opposed to connectors which are located on the CPV5300's front panel
and the CPV5300 Transition Module's rear panel. Refer to Appendix A for
pin assignment information.
Note
When the identical function is available through the
CPV5300's front panel and rear transition module, you can
use either the front or the rear, not both.
Please note the following cautions when connecting peripherals to the
CPV5300.
Always remove power from the system before connecting
peripherals to the CPV5300. To reduce the risk of personal
injury, disconnect the power cord from the power source.
Only qualified, experienced electronics personnel should
access the interior of a chassis.
The components of the CPV5300 are sensitive to static
discharge. While out of the unit, the CPV5300 should be
placed on a static-dissipative surface or into a static-shielding
bag.
The Mobile Module determines CPU speed. You cannot configure the
speed settings.
Advertisement
Table of Contents
