Inputting Characters - Canon DP-V2411 Instruction Manual

Inputting Characters

This section describes how to input the characters. Use this function to specify a channel name, a display name, or
filename.
1 When the character input screen is displayed, use the
jog dial ( ) to select the area you wish to input.
2 Select characters using the jog dial (
• The following characters can be selected: Press
buttons to display them one by one. You can input up to
16 characters.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: , . : ; ' ` - + / = % & ! ? # _ | $ ^ ~ @ { } [ ] < > ( ) space
• Some characters cannot be used for a filename. In this case, they are automatically skipped.
3 Repeat steps 1 and 2 until the desired text has been input.
4 Press the jog dial when you are finished.
• The selection frame moves to [OK].
5 Check the content and press the jog dial to confirm the settings.
Reference
• When selecting [Cancel] or pressing MENU button before selecting [OK], the settings will be reset and the previous screen will be
displayed.
• To erase a character in the selection frame, press the RESET button of the video display.
Using the Function (F) Buttons
You can assign functions to the F buttons on the video display to execute them instantly. You can assign different
functions on F buttons in the normal and CDL modes respectively.
1 Open the [Display Function] or [Display Function (CDL)] menu.
[System Settings]
• The button selection screen will be displayed.
2 Select the name of the button using the jog dial and press the jog dial to determine the selection.
3 Select the function to assign using the jog dial.
• Refer to the "Function to allow registration for the display F buttons (
4 Press the jog dial to determine the selection.
• The setting is confirmed.
or rotation).
[Function/Channel Button] [Display Function] or [Display Function (CDL)]
80)" for the available functions.
Operating the Video Display
29