Ruckus Wireless ZoneFlex 7781CM Installation Manual page 9

Table 1. Adding a 7781CM to an Existing Ruckus Wireless network
Section
2
3
4
5
6
Heading
Planning the 7781CM Installation
• 7781CM Versions
• 7781CM Connectors
• 7781CM LEDs
• Reading the 7781CM LEDs
• Powering Options
• Cable Modem Heater
• Positioning the GPS Antenna
• Performing a Site Survey
Preparing the 7781CM at the Depot and Shipping to the Field
• Unpacking the 7781CM
• Finding the AP and CM MAC Addresses
• Powering the 7781CM with DC
• Preparing the Administrative Computer
• Operating the CM
• Using SSH to set the ZoneDirector IP address on the AP
• Configuring the AP for Management by FlexMaster or for
Standalone Operation
• Verifying AP Operation
• Shipping the 7781CM to the Field
Installing the 7781CM in the Field
• Installation Components and Constraints
• Deploying the 7781CM
• Verifying AP and CM Operation
Operating and Troubleshooting the 7781CM
• Switching LEDs to CM Mode
• Retrieving the CM's MAC Address
• Rebooting and Resetting the 7781CM
• How Radio Frequency Scanning Works
What to Do Next
• Changing the Administrative Password
• Configuring the Security Settings
• Configuring Advanced Settings and Features
• Reading Related Documentation
About This Installation Guide
Using this Installation Guide
3