GROUPED ELEMENTS
5.7.13 Voltage elements
5.7.13.1 Menu
SETTINGS GROUPED ELEMENTS SETTING GROUP 1(6) VOLTAGE ELEMENTS
VOLTAGE ELEMENTS
5
These protection elements can be used for a variety of applications, such as
•
Undervoltage protection — For voltage sensitive loads, such as induction motors, a drop in voltage increases the
drawn current, which can cause dangerous overheating in the motor. The undervoltage protection feature can be
used to either cause a trip or generate an alarm when the voltage drops below a specified voltage setting for a
specified time delay.
•
Permissive functions — The undervoltage feature can be used to block the functioning of external devices by
operating an output relay when the voltage falls below the specified voltage setting. The undervoltage feature can
also be used to block the functioning of other elements through the block feature of those elements.
•
Source transfer schemes — In the event of an undervoltage, a transfer signal can be generated to transfer a load
from its normal source to a standby or emergency power source.
5-270
PHASE
UNDERVOLTAGE1
PHASE
UNDERVOLTAGE3
PHASE
OVERVOLTAGE1
PHASE
OVERVOLTAGE3
NEUTRAL OV1
NEUTRAL OV3
NEG SEQ OV1
NEG SEQ OV3
AUXILIARY UV1
AUXILIARY UV3
AUXILIARY OV1
AUXILIARY OV2
COMPENSATED
OVERVOLTAGE
See below
See page 5-272
See page 5-273
See page 5-274
See page 5-275
See page 5-276
See page 5-277
D60 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: SETTINGS