Lock / Unlock - Trio Motion Coordinator MC216 Technical Reference Manual

Trio Motion Technology

Lock / Unlock

Lock Controller
Locking the controller will prevent any
unauthorised user from viewing or modify-
ing the programs in memory.
You simply need to enter a numeric code
(up to 7 digits). This value will be
encoded by the system and used to lock
the directory structure. The lock code is
held in encrypted form in the flash mem-
ory of the Motion Coordinator.
This can also be achieved by issuing the LOCK(lock_code) command from the con-
troller's command line.
Once the Motion Coordinator is locked it is not possible to list, edit or save any of
the controller programs. You cannot connect to the controller with Motion Per-
fect 2, although the terminal screen and unlock dialog will still be available.
If you forget the lock code there is no way to unlock the controller. You will
WARNING:
need to return it to Trio or a distributor to have the lock removed.
Unlock Controller
In order to unlock the controller you need
to enter the same numeric code which
was used to lock it. Once the unlock code
is entered it will be possible to gain full
access to the programs in memory.
10-20 Support Software
The Motion Perfect Desktop