AirTies Air 4920 Quick Installation Manual page 9

RETURNING UNITS TO FACTORY
SETTINGS:
To return the unit to factory settings, power on the unit, wait for the Power LED to
be lit solid white and press down on the reset button (in a small opening on the
back) for 10 – 12 seconds. A metal paperclip is a good choice to do this. When
the reset process is successfully triggered, the LEDs in the front will temporarily
"blink" and the unit will reboot (in about 2 minutes) to factory settings.
Note:
When returning meshed units to Factory Default state, all Access Points
need to be reset within 2 minutes of resetting the first unit. If not, settings from
the units that have not yet been factory reset will again overwrite the factory
settings of the first unit.
9