Table of Contents
Advertisement
(5) Component 15k Hz signal adjustment
Adjustment item
1
Setup
2
COMP 15k
CONTRAST
adjustment
3
COMP 15k COLOR
GAIN adjustment
4
MAIN CR GAIN COMP
15k adjustment
(6) Component HDTV signal adjustment
Adjustment item
1
Setup
2
COMP HDTV
CONTRAST
adjustment
2. Factory settings
(1) Data Copy
Adjustment item
1
DATA COPY
(2) Factory Setting
Adjustment item
1
INDUSTRY INIT
* Then turn off the AC power supply of the AVC system. (Be careful not to use the power switches of the remote control unit
and AVC system.)
Description
1. Select component 15k Hz.
2. Select component source.
Adjust TB1274_MAIN output (TP803) to 0.7 ±0.05 Vp-p.
Adjust TB1274_MAIN output
(TP802) to 0.35 ±0.025 Vp-p.
Adjust TB1274_MAIN output
(TP801) to 0.35 ±0.025 Vp-p.
Description
1. Input HDTV (1080i) component signal.
2. Select component source.
Turn off the PEAK ACL control.
Adjust the output (TP815) of pin (11) of IC810 to have
1.1 ±0.05 Vp-p from the pedestal level.
Description
1. Using the adjustment key, set "ON" in the DATA
Description
Move the cursor to the INDUSTRY INIT line. Using the
Vol.UP key, turn off and on again, and press ENTER. "/
/////////" appears, telling that the program is now being
settings are complete. Be sure to wait until the sign
goes out.
19
Adjustment procedure
100% colour bar signal including 100% white, like
split field colour bar
0.35V
0.35V
Adjustment procedure
100% colour bar signal including 100% white, like
split field colour bar
Adjustment procedure
COPY line. Wait until "OFF" is displayed instead.
Finally turn off the power to quit the process
adjustment mode.
Adjustment procedure
PZ-43MR2E
PZ-50MR2E
Advertisement
Table of Contents
