Figure 2-5 Screws for Hanging 19" Frame in Rack Unit - Exploded View
3) Align the keyholes on the brackets with the two screws on the rack metal uprights, and
hang the frame on the rack metal uprights. See Figure 2-6. Tighten the two screws to the
uprights.
4) To reinforce the installation, add three more M5 screws (not supplied), through the
remaining three holes on the metal bracket, into the upright of the 19" rack unit. Repeat on
the opposite upright. See Figure 2-6.
19" Rack Unit
Metal Uprights
2-5
Installation