Download Print this page
prowarm TR3100 Manual

prowarm TR3100 Manual

Pro digital thermostat

Advertisement

Quick Links

LCD Symbols
The buttons are locked
Heating is turned on
RT
RT
Room temperature
FT
FT
Floor temperature
Please Note: There is not a red light on the thermostat, it is a red lens covering a receiver for the remote-control function
Thermostat Mode / Sensor Selection
The thermostat has three different modes as it has a built in temperature sensor and a remote floor sensor (must be connected when used with
electric underfloor heating). The unit can operate on Air temperature (A mode), Floor temperature (F mode) or Air and Floor temperature (AF mode).
'A' mode should not be used with electric underfloor heating, it can be used to control other heating devices.
'AF' mode for when the underfloor heating is used as a primary heat source, but a floor temperature limit is needed.
'F' mode for when the thermostat is outside the heated room e.g. a bathroom, or when being used as a secondary heat source.
Note: These can be changed in 'General Settings' on the last page of these instrauctions.
prowa
www.
PRO DIGITAL THERMOSTAT
Buttons
M
O/RIDE
O/RIDE
Temporary temperature
Frost protection
activated
Comfort temperature
mode
Economy temperature
mode
a
r
r
m
.com
Power Button
– Switches the unit on and off
Menu Button
– This button enables access to the menu and programme settings.
Also toggles between manual mode and automatic Mode.
Clock Button
– Allows adjustment of the time and day of the week.
It also removes the override function when held down.
Up Arrow
– Increases the temperature and adjusts the menu and programming settings.
If held down it will also activate/deactivate the unit's holiday mode feature.
Down Arrow
– Decrease the temperature and adjust the menu and programming settings.
If held down it will also activate/deactivate the unit's holiday mode feature.
A
A
Air mode
AF
AF
Air and floor mode
F
F
Floor mode
Program
Program
The program number
1,2,3,4
1,2,3,4
MODEL TR3100
Automatic mode, executes the
AUTO
AUTO
programmed schedules
Vacation temperature
mode
Manual mode runs 24 hours a day, the
user simply sets the desired temperature
using the arrow keys.
0
0
1268
567
support
7
019

Advertisement

loading
Need help?

Need help?

Do you have a question about the TR3100 and is the answer not in the manual?

Questions and answers

Mrs C J Klein
February 7, 2025

there is a small glass button on the right hand side - mine is never illuminated, should it be? (the screen is illuminated and appears to be working)

Phillip Drewett
April 1, 2025

UNABLE TO DEACTIVATE LOCKED BUTTON

1 comments:
Mr. Anderson
April 1, 2025

To deactivate the locked button on the ProWarm TR3100, press and hold both the up and down arrow buttons for 3 seconds until the lock symbol disappears.

This answer is automatically generated

Summary of Contents for prowarm TR3100

  • Page 1 PRO DIGITAL THERMOSTAT MODEL TR3100 Buttons Power Button – Switches the unit on and off Menu Button – This button enables access to the menu and programme settings. Also toggles between manual mode and automatic Mode. Clock Button – Allows adjustment of the time and day of the week.
  • Page 2: Set The Time And Day

    PRO DIGITAL THERMOSTAT MODEL TR3100 Set the Time and Day Step 1. Press the button and the time will flash Step 2. Use up or down button to change the time (Hold up or down button to change by 15 minutes each time.) This thermostat is fitted with a real time clock.
  • Page 3: Factory Reset

    PRO DIGITAL THERMOSTAT MODEL TR3100 View floor temperature Factory Reset Your thermostat has the ability to reset all settings to the factory defaults. If thermostat is set in model, and set to show air temperature only, press and hold the Down button for 3 seconds, floor temperature will show and it will...
  • Page 4: General Settings

    PRO DIGITAL THERMOSTAT MODEL TR3100 General Settings Press button to turn the thermostat on/off. When thermostat is turned off, the LCD will only display current temperature reading. To Access the Settings: With the thermostat in the off position. (It will only display the mode and temperature when turned off). Press and hold the button for 3-5 seconds to bring up a configuration menu.