Page 2
Sena. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod ® touch are the registered trademark of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or...
13.2 Intercom and Mobile Phone Call ..................28 2. PACKAGE CONTENTS ......................6 13.3 Intercom and GPS .......................28 3. INSTALLING THE SMH10 ON YOUR HELMET ................ 7 13.4 Intercom and Two-way Radio ....................29 4. POWERING ON/OFF AND CHARGING .................. 10 14. THREE-WAY CONFERENCE INTERCOM ................30 Powering On .........................10...
• Three-way conference phone call with intercom participant • Multipoint Bluetooth pairing with GPS navigation or Sena SR10 The SMH10 is compliant with the Bluetooth 3.0 supporting the following two-way radio adapter profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio • Multipoint Bluetooth for dual mobile phone Distribution Profile (A2DP), and Audio Video Remote Control Profile •...
SMH10 SMH10 SMH10 • Clamp Unit 2. PACKAGE CONTENTS - Speaker-Microphone Clamp Unit - Basic Kit (SMH10-10/SMH10D-10) • Headset Main Unit Speakers DC Power Charging & Firmware Upgrade Port Phone Button • Answer and end a mobile phone call • Redial last number...
3. INSTALLING THE SMH10 ON YOUR HELMET • USB Power & Data Cable • Cigarette Charger To securely install the SMH10 on the helmet, please follow the procedure. 1. Loosen the two screws on the back plate of the speaker- •...
Page 7
SMH10 2. Please adjust the direction of the microphone so that the fin side facing close to your mouth when you wear the helmet. You can use of the microphone is facing outward; away from your lips. You can the enclosed velcro pad and holder for the boom microphone to easily recognize it by touching the fin with your fingers. ensure secure placement.
Page 8
Attach Sena recommends the clamp unit over the glued surface mounting adapter. Even though the glued surface mounting 4. If you have any problem to clamp the speaker-microphone unit...
SMH10 6. To remove the main headset from the speaker-microphone clamp 4. POWERING ON/OFF AND CHARGING unit, hold the lower part of the speaker-microphone clamp unit with your thumb and gently press down the hook on the upper part of the headset main unit with your index finger until it clicks out. You...
SMH10 4.4 Low Battery Warning 5. VOLUME ADJUSTMENT When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-tone triple beeps and a voice prompt saying “Low battery”. You can easily adjust the volume by rotating the Jog Dial. You will 4.5 Checking the Battery Level...
6.1 Mobile Phone Pairing again until the red LED is rapidly flashing and you hear multiple 1. Turn on the SMH10 and press the Phone Button for 5 seconds until beeps. the LED flashes red and blue alternately and you hear multiple 2.
5. The mobile phone confirms that pairing has completed and the is disconnected, tap the Phone Button to recover the Bluetooth SMH10 is ready to use. You will hear a voice prompt from the connection immediately. SMH10 saying “Your headset is paired”.
Page 13
“Multipoint pairing”. 3. Search for Bluetooth devices on the GPS navigation screen. Select Smart Phone the Sena SMH10 in the list of the devices detected on the GPS. 4. Enter 0000 for the PIN. Mobile Phone 5. The GPS confirms that pairing has completed and the SMH10 is...
The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems. If you pair the SMH10 with a SR10 by multipoint pairing, the SMH10 is able to have two HFP devices at the same Mobile Phone Pairing (A2DP) time: mobile phone and Sena SR10.
Page 15
SMH10 The incoming audio from the two-way radio via SR10 is heard in the background while having an intercom conversation or a mobile phone call. You can listen to music, answer a mobile call, have an intercom conversation and use a two-way radio via SR10 for group communication as shown in the figure below. A GPS navigation or...
A2DP stereo music only or for mobile phone handsfree only. This 1. Turn on the headset and press the Phone Button for 5 seconds instruction is for advanced users who want to pair the SMH10 to their until the LED flashes red and blue alternately and you hear smartphones only with one selective profile: A2DP stereo for music multiple beeps.
SMH10 8. INTERCOM PAIRING 8.1 Pairing with Other SMH10 Headsets for Intercom Conversation The SMH10 can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two SMH10 headsets (A and B) that you would like to pair with each other. Pairing A & B 2. Press and hold the Jog Dial of the headset A and B for 5 seconds 4.
Phone Button, or disable the feature by tapping the Jog Dial. as the SMH5 and the SPH10 for intercom conversation. Please follow 4. If any button is not pressed within 10 seconds, the SMH10 will exit the same procedure as above to pair with these headset models.
“Cancel”, and tap the Phone Delete all pairings VOX intercom Button to confirm. You will then hear a voice prompt saying “Cancel”. If any button is not pressed within 1 minute, the SMH10 Sidetone Voice prompt will exit the configuration menu and go back to stand-by mode.
20 seconds Dial or the Phone Button to answer an incoming call. of silence. After turning SMH10 off and on, you can start intercom 9.3 Enabling/Disabling Voice Activated Intercom by voice again.
You can disable voice prompts by configuration setting, but the following voice prompts are always on. To delete all Bluetooth pairing information of the SMH10, rotate the - Voice prompts for configuration setting menu Jog Dial until you hear a voice prompt saying “Delete all pairings”, - Voice prompts for battery level Indicator and tap the Phone Button to confirm. Taping the Jog Dial is not...
SMH10 Rotate Jog Dial Tap Phone Button Tap Jog Dial 10. FUNCTION PRIORITY Speed Dial Execute VOX Phone Enable Disable The SMH10 operates in the following order of priority: VOX Intercom Enable Disable (highest) Mobile phone, Voice Prompt Enable Disable Intercom, Sidetone Enable Disable Stereo music by audio cable,...
Bluetooth wireless stereo. 11.1 By Stereo Audio Cable Plug your stereo MP3 player directly to the SMH10 by using the enclosed 3.5mm stereo audio jack cable. To adjust the volume, rotate the Jog Dial on the headset. You may adjust the volume on the MP3 player also.
SMH10 3. To track forward or track back, rotate while pressing the Jog Dial 12. MOBILE PHONE CALL MAKING AND ANSWERING clockwise or counter clockwise. 12.1 Mobile Phone Call Making and Answering 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call.
Phone Button or the Jog Dial. If any button is not pressed within 15 menu. seconds, the SMH10 will exit the voice speed dial menu and goes 1. To enter into the voice speed dial menu, double tap the Phone back to stand-by mode.
SMH10 Answer Tap Phone Button or Tap Jog Dial or Say “Hello” 13. TWO-WAY INTERCOM Tap Phone Button or Press Jog Dial for 2” Reject Press Jog Dial for 2” 13.1 Start and End Two-way Intercom Transfer Press Phone Button for 2”...
13.3 Intercom and GPS 13.2 Intercom and Mobile Phone Call If you pair a Bluetooth GPS to the SMH10 as described in 6.4 of 1. When you have an incoming mobile phone call during an intercom this user's guide, you can hear the turn-by-turn voice instruction conversation, you will hear a ring tone. You can choose whether to 1)
SMH10 Bluetooth intercom simultaneously by using the Radar Detector Sena SR10, a Bluetooth Two-way Radio Adapter, along with the SMH10. Incoming audio from the two-way radio is not interrupting an intercom conversation but is heard in background. This is useful Intercom Friend...
14.1 Start Three-way Intercom You (A) can have a three-way conference intercom with two other SMH10 friends (B & C) by establishing two intercom connections at the same time. While a three-way conference intercom is in First Friend...
SMH10 14.2 End Three-way Intercom 3. The second intercom friend (C) may join the intercom by making an intercom call to you (A). When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press the Jog Dial for 1 second until you hear a beep to terminate three-way conference intercom completely.
15.1 Start Four-way Intercom 1. Press the Jog Dial for 1 second until you hear a beep to terminate You can have four-way conference intercom with three other SMH10 four-way conference intercom. It terminates the intercom connections users by adding one more intercom participant to the three-way between you (A), and your intercom friends (B), (C) and (D).
3. In order to share music, make sure that you update both headsets with 2. Press and hold the Jog Dial on the SMH10 for 8 seconds until the firmware that has the music sharing feature, and enable the EDR the blue LED flashes rapidly. You will hear a voice prompt saying...
Bluetooth headsets using the same intercom connection method as you can use a mobile phone call function. During the intercom call, you would between other Sena headsets. You may single tap the Jog you cannot pick up the incoming phone call since it is disconnected, Dial to begin an intercom conversation with the first intercom friend, however, you can pick it up if you disconnect the intercom call.
Page 34
SMH10 2. Start an intercom conversation with non-Sena Bluetooth headset 4. Now you (A), non-Sena Bluetooth headset (B), and the other (B) in your intercom group. For example, you (A) may start an SMH10 (C) are having a three-way conference intercom. intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an intercom call with you (A).
You may have a couple of other four-way Universal Intercom configurations, 1) your headset (A), a non-Sena Bluetooth headset (B), another SMH10 (C), and a non-Sena Bluetooth headset (D), 2) your headset (A), a non-Sena Bluetooth headset (B), and two other SMH10 headsets (C and D). You may make the four-way Universal...
SMH10 4. Now two SMH10 headsets (A & C) and two non-Sena Bluetooth 18. THREE-WAY CONFERENCE PHONE CALL headsets (B & D) are connected with the four-way Universal Intercom. WITH INTERCOM PARTICIPANT You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation. While having a...
21. RESET TO FACTORY DEFAULT SETTINGS When you try to start an intercom conversation with an intercom friend 1. To restore the SMH10 to factory default settings, press and hold who is already having a conference intercom with other riders or a...
22. FAULT RESET 23. FIRMWARE UPGRADE When the SMH10 is not working properly or is in faulty status for any The SMH10 supports firmware upgrade function. Please visit Sena reason, you may reset by pushing the pin-hole reset button at the Bluetooth web site at www.SenaBluetooth.com to check the latest...
SMH10 24. SENA BLUETOOTH CONNECTION CASE STUDIES Case 1 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing Mobile Phone Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Mobile Phone Pairing Usage • Mobile phone: phone call, listening to music • GPS: GPS instruction • Intercom...
Page 40
SMH10 Case 3 Case 2 GPS - Mobile Phone Pairing Bluetooth GPS* Mobile Phone Bluetooth GPS* Mobile Phone Mobile Phone Pairing Pairing Intercom Multipoint Intercom Pairing Pairing Pairing Mobile Phone Bluetooth Pairing Procedure Bluetooth Pairing Procedure 1 Mobile Phone Pairing...
Page 41
SMH10 Case 4 Case 5 Mobile Phone Mobile Phone Mobile Phone Pairing Mobile Phone Pairing Intercom Mobile Phone Pairing Pairing Motorcycle Bluetooth Intercom Mobile Phone Audio System* Pairing Pairing Bluetooth GPS* Music Bluetooth Pairing Procedure Bluetooth Pairing Procedure 1 Mobile Phone Pairing...
Page 42
SMH10 Case 6 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Multipoint Pairing Mobile Phone 4 Intercom Pairing Bluetooth GPS* Mobile Phone zumo 220/350/550/660/665, TomTom Rider Pairing Motorcycle Bluetooth Audio System* BMW R1200RT, K1600GT, K1600GTL Usage • Mobile Phone: phone call...
Page 43
SMH10 Case 7 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing Mobile Phone Usage • Mobile Phone: phone call Mobile Phone • SR10: two-way radio, GPS guidance, Radar detecting signal Pairing • Intercom SR10 Multipoint Pairing Two-way Radio Intercom Pairing Radar Detector...
Page 44
SMH10 Case 8 Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Intercom Pairing Mobile Phone Mobile Phone GPS - Pairing Pairing Mobile Phone Bluetooth GPS* Bluetooth GPS* Pairing MP3 Player...
Page 45
SMH10 Case 9 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing Mobile Phone 4 Multipoint Pairing 5 Intercom Pairing Mobile Phone Usage Pairing • Mobile Phone: phone call • SR10: two-way radio, GPS instruction, Radar detecting signal • SM10: listening to music/sharing SR10 SM10 • Intercom...
Page 46
SMH10 Case 10 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing Mobile Phone 4 Multipoint Pairing 5 Intercom Pairing Mobile Phone Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Usage • Mobile Phone: phone call Multipoint Intercom • GPS: GPS instruction...
SMH10 25. OPERATION QUICK REFERENCE Button Description Duration Beep Button Description Duration Beep 5 sec Red flashing Double tone beeps Power-on 1 sec Solid blue Ascending beeps Phone Button Intercom pairing + Jog Dial Jog Dial of any one of the two headsets...
MAINTENANCE AND CARE The product has an internal, non-removable, rechargeable battery. The SMH10 should be treated with care and the following suggestions Do not attempt to remove the battery from the device as you may will help you protect your warranty coverage.
SMH10 DISPOSAL CERTIFICATION AND SAFETY APPROVALS The crossed-out wheel bin symbol on the product, FCC Compliance Statement literature, or packaging reminds you that all electrical This device complies with part 15 of the FCC Rules. Operation is and electronic products, batteries, and accumulators...
Bluetooth ® This product is CE marked according to the provisions of the R&TTE SIG, Inc. and any use of such marks by Sena is under license. Other Directive (99/5/EC). Hereby, Sena declares that this product is in trademarks and trade names are those of their respective owners...
(jointly referred to as the “Company” or “Sena”) strongly advise you to take all necessary precautions and remain alert to the traffic, weather Sena hereby notifies you that using this Device may also be in and road conditions if you choose to use the product headset, contravention to local, federal, state or national laws or regulations,...
This warranty is limited to the repair and/or replacement, at Sena’s total paralysis, death or other ailments that could cause serious discretion, of defective or non-conforming Product, and Sena shall disability; (b) these risks and dangers may be caused by the...
HEREUNDER OR THE PERFORMANCE, USE OR INABILITY TO USE by Sena. THE SAME, EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL SENA Limited warranty service may be obtained by delivering the Product...
SMH10 WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding.
Page 55
3.3.0 www.SenaBluetooth.com User's Guide for Firmware v5.0...
Need help?
Do you have a question about the SMH10 and is the answer not in the manual?
Questions and answers