Page 1
SMH5 Bluetooth ® Headset & Intercom for Scooters & Motorcycles User's Guide www.SenaBluetooth.com...
Page 2
These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are the registered trademark of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or...
11. USING THE SMH5 ....................20 11.1 Volume Adjustment .....................20 2. PACKAGE CONTENTS ..................6 11.2 Mobile Phone Call Making and Answering ............20 3. INSTALLING THE SMH5 ON YOUR HELMET ............7 11.3 Speed Dialing .....................21 4. POWERING ON/OFF AND CHARGING ...............10 11.4 Intercom Conversation ..................22 4.1 Powering On .......................10...
Thank you for choosing the Sena SMH5, Bluetooth Stereo Headset • Bluetooth stereo headset for Bluetooth GPS navigations and Intercom for scooters and motorcycles. With the SMH5, you can • Bluetooth intercom up to 400 meters (430 yards)* call handsfree on your Bluetooth mobile phone, listen to stereo music •...
SMH5 2. PACKAGE CONTENTS • Clamp Unit • Headset Main Unit • Helmet Speakers • Microphone •Charging LED - Basic Kit • Attachable Boom Microphone • Velcro Pad for Boom Microphone Jog Dial Phone Button • Attachable Boom Microphone Holder DC Power Charging &...
SMH5 3. INSTALLING THE SMH5 ON YOUR HELMET - Full-face Helmet Kit 1. Loosen the two screws on the back plate of the clamp using the • Wired Microphone enclosed Allen Wrench. Insert the back plate of the clamp unit between the internal padding and external shell of the helmet, and tighten the two screws.
Page 7
Sena recommends the clamp unit over the glued surface mounting plate. Even though the glued surface mounting plate is provided for convenience, Sena does not assume any responsibility for use of it. Users may have to use the glued plate at their own risk and responsibility.
Page 8
SMH5 6. When you use the boom microphone included in the “Basic Kit”, please make sure that the fin side of the microphone is facing outward; away from your lips. You can easily recognize it by touching the fin with your fingers.
SMH5 Note: 4. POWERING ON/OFF AND CHARGING Be sure to connect the speaker cable securely to the main unit. It is strongly recommended that you insert the cable tightly into the connector housing while holding the main unit. To power on and off the headset, you don’t need to press and hold any button for several seconds.
4.3 Charging 5. CHECKING THE BATTERY LEVEL • To charge the SMH5, use the USB Power & Data Cable included in the package by plugging into computer’s USB port or USB wall charger. USB wall charger is not included in the package, but you You can check the battery level in two different ways when the can use any USB wall charger in the market.*...
4. The mobile phone confirms that pairing has completed and the DEVICES SMH5 is ready to use. You will hear a voice prompt from the SMH5 saying “Your headset is paired”. Before using the SMH5 Bluetooth headset with any of Bluetooth 5.
6.3 Bluetooth GPS Navigation Pairing 6. The mobile phone confirms that pairing has completed and the SMH5 is ready to use. You will hear a voice prompt from the SMH5 You can listen to voice instruction from Bluetooth GPS navigation.
5. The GPS confirms that pairing has completed and the SMH5 is 6.3.2 GPS Pairing as Mobile Phone ready to use. You will hear a voice prompt from the SMH5 saying If GPS is not only used for turn-by-turn voice instructions but also is “Your headset is paired”.
You will hear a voice prompt saying “Phone selective pairing”. phone and SMH5. To clear the pairing list on SMH5, please do a 3. Search for Bluetooth devices on your smartphone. Select the Sena factory reset described on the page 19.To clear the pairing list on...
The SMH5 can be paired with up to three other headsets for Bluetooth Intercom conversation. 1. Turn on the two SMH5 headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A and B for 5 seconds Pairing A &...
9. PAIRING WITH OTHER SENA HEADSET the Phone Button, or disable the feature by tapping the Jog Dial. 4. If any button is not pressed within 10 seconds, the SMH5 will exit MODELS FOR INTERCOM CONVERSATION the configuration and goes back to stand-by mode.
Phone Button to confirm. You will then hear a voice prompt saying “Cancel”. If any button is not pressed within 1 minute, the Delete all pairings Voice prompt SMH5 will exit the configuration menu and go back to stand-by mode. 10.1 Assigning Speed Dial Note: Voice Prompt “Speed dial”...
If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough. For example, when you hear a series To delete all Bluetooth pairing information of the SMH5, rotate the Jog of beeps for an incoming call, you can answer the phone by saying Dial until you hear a voice prompt saying “Delete all pairings”, and...
SMH5 Rotate Jog Dial Tap Phone Button Tap Jog Dial 11. USING THE SMH5 Speed Dial Execute 11.1 Volume Adjustment VOX Phone Enable Disable You can easily adjust the volume by rotating the Jog Dial. You will Voice Prompt Enable Disable hear a beep when the volume reaches maximum or minimum level.
SMH5 11.3 Speed Dialing 5. To transfer a call between the mobile phone and the headset during the phone conversation, press the Phone Button for 2 seconds You can quickly make a phone call by using the voice speed dial until you hear a beep.
Phone Button or the Jog Dial. If any button is not pressed within 15 by tapping the Jog Dial: single tapping to intercom with the first seconds, the SMH5 will exit the voice speed dial menu and goes intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend.
Jog Dial for 2 seconds until you hear a beep. will be disconnected. In this case, the SMH5 automatically tries to Unlike other motorcycle Bluetooth headsets, this prevents a reconnect the intercom every 8 seconds.
You can listen to stereo music by Bluetooth wireless stereo. The Bluetooth audio device must be paired with the SMH5 by following the Bluetooth Stereo Device Pairing instructions described in the previous chapter. The SMH5 supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SMH5 to remotely control music playback.
11.11 Reset to Factory Default Settings call. 1. To restore the SMH5 to factory default settings, press and hold the 11.10 Music Sharing Phone Button for 12 seconds until the LED shows solid red and you You can start sharing music with an intercom friend using Bluetooth hear high tone double beeps.
11.12 Fault Reset 12. FIRMWARE UPGRADE When the SMH5 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pin- The SMH5 supports firmware upgrade function.
Recharge the 2. Do not store the device in hot areas. High temperatures can battery only with Sena approved chargers designated for this device. shorten the life of electronic devices, damage batteries, and wrap Use of an unapproved charger may present a risk of fire, explosion, or melt certain plastics.
SMH5 DISPOSAL CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical This device complies with part 15 of the FCC Rules. Operation is and electronic products, batteries, and accumulators...
® SIG, Inc. and any use of such marks by Sena is under license. Other authority to operate the equipment. trademarks and trade names are those of their respective owners.
Agents, Contractors, Sponsors, Employees, Suppliers and Resellers (jointly referred to as the “Company” or “Sena”) strongly advise you to Sena hereby notifies you that using this Device may also be in take all necessary precautions and remain alert to the traffic, weather...
Device while in traffic, including This warranty is limited to the repair and/or replacement, at Sena’s but not limited to injury or illness, strains, fractures, partial and/or discretion, of defective or non-conforming Product, and Sena shall...
SMH5 associated or complementary equipment or software not furnished OR INABILITY TO USE THE SAME, EVEN IF SENA OR ITS DEALER by Sena. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN Limited warranty service may be obtained by delivering the Product...
SMH5 WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding.
Page 34
1.3.0 www.SenaBluetooth.com User's Guide for Firmware v1.3...
Need help?
Do you have a question about the SMH5 and is the answer not in the manual?
Questions and answers