About Disconnect Cause Types - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

About disconnect cause types

The following parameters are logged when a call is
disconnected. The disconnect cause types are used in
disconnect events (xEvent).
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration
CauseValue
CauseType
CauseString
CauseCode
CauseOrigin
Example:
xEvent DisconnectEvent
*e CallDisconnect CauseValue: 1
CauseType: "LocalDisconnect"
CauseString: ""
OrigCallDirection: "outgoing"
RemoteURI: "firstname.lastname@company.com"
CallId: 89
CauseCode: 0
CauseOrigin: SIP
** end
xCommand
Proprietary. We recomend the use of CauseType and CauseCode.
Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
Describes the Cause Code.
The disconnect Cause Codes are defined in SIP and Q.850.
SIP, Q.850, internal.
200
API Reference Guide
xStatus Appendices Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.