Diagnostics Commands; Xcommand Diagnostics Run; Dial Commands; Xcommand Dial - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

Diagnostics commands

xCommand Diagnostics Run

This command runs self-diagnostics commands on the system.
Requires user role: ADMIN
USAGE:
xCommand Diagnostics Run [ResultSet: ResultSet]
where
ResultSet
: Alerts/All/None
You can filter the diagnostics results to alerts, all or none. If not set, the result will show
all results. The default is set to Alerts.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

Dial commands

xCommand Dial

Dial out from the system. Returns information about the CallId and ConferenceId, which are
required for some of the other commands.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand Dial Number: "Number" [Protocol: Protocol] [CallRate: CallRate]
[CallType: CallType] [BookingId: "BookingId"] [Appearance: Appearance]
[DisplayName: "DisplayName"]
where
Number
: String (0, 255)
Enter the number or address.
Protocol
: H320/H323/Sip/Spark
Select the call protocol.
CallRate
: Integer (64..3072)
Set the call rate.
CallType
: Audio/Video
Select the call type.
BookingId
: String (0, 255)
Any identifier that an external booking system (e.g. TMS, CTS-MAN) can use for its
own references to match placed calls with the booking systems internal identifier for a
meeting. This can be any string, e.g. a GUID. The booking Id is supplied in call logs, call
events etc for the call.
Appearance
: Integer (1..999999999)
Internal usage only.
DisplayName
: String (0, 255)
The display name of the remote participant.
106
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.