Hitachi 3080 Network Administration Manual page 52

ARP Cache
Timeout
(seconds)
Ignore ICMP
Redirect
Port
Current
Settings
To customize the global settings, specify the values to use for the global
configuration settings by changing the values of the fields in the Global
Settings area. All aggregations (interfaces) use the global settings by default.
Click apply to save the changes.
To restore the global settings to the factory default values, click reset.
Interface settings
To customize settings for an individual interface, select the interface (in the
Ports field) and click customize. The Advanced IP Per-Port Configuration
page appears.
The following table describes the fields on this page:
Per-port settings
Ignore ICMP Echo Requests
IP MTU for Off-Subnet Transmits (bytes)
TCP MTU
Other Protocol MTU
Enter the new values in the fields, and click OK. The new settings override
the global settings.
To restore the settings of an interface to the global configuration, select an
interface in the Ports field, and then click restore. The settings for the
interface are erased and revert to the default (global settings).
52
This field controls the time before which the server removes an
60
unused ARP entry from the caching table.
No (empty) This field specifies whether to ignore ICMP redirects.
ag1 - agX This field lists the name of each currently configured aggregation
or interface in the server/cluster.
eth-ag1 - eth-
agX
eth0, eth1
mgmnt1
This field indicates whether the aggregation or interface uses the
default (global) settings, or customized settings. If the
aggregation/interface uses customized settings, the details
button appears. Click on the details button to edit the customized
configuration.
Configuring IP addresses
Hitachi NAS Platform Network Administration Guide
Default settings
No (empty)
1500
1500
1500