Ntroduction And General Information; Warranty And Supply Conditions; Not Included In The Supply - ABB VSN300 Product Manual

Introduction and general information
W
arranty and Supply Conditions
The equipment complies with the pertinent legislation currently in force in the country of in-
stallation and it has issued the corresponding declaration of conformity.
N
ot included in the supply
ABB accepts no liability for failure to comply with the instructions for correct installation and will
not be held responsible for systems upstream or downstream the equipment it has supplied.
It is absolutely forbidden to modify the equipment. Any modification, manipulation, or alteration
not expressly agreed with the manufacturer, concerning either hardware or software, shall re-
sult in the immediate cancellation of the warranty.
The Customer is fully liable for any modifications made to the system.
The warranty conditions are considered to be valid if the customer adhe-
res to the indications in this manual; any conditions deviating from those
described herein must be expressly agreed in the purchase order.
Given the countless array of system configurations and installation envi-
ronments possible, it is essential to check the following: sufficient space
suitable for housing the equipment; airborne noise produced depending
on the environment; potential flammability hazards.
ABB will NOT be held liable for defects or malfunctions arising from: im-
proper use of the equipment; deterioration resulting from transportation
or particular environmental conditions; performing maintenance incor-
rectly or not at all; tampering or unsafe repairs; use or installation by
unqualified persons.
ABB will NOT be held responsible for the disposal of: displays, cables,
batteries, accumulators etc. The Customer shall therefore arrange for the
disposal of substances potentially harmful to the environment in accor-
dance with the legislation in force in the country of installation.
- 4 -
1