Software Installation; Installation And Starting Of Imagingwin - Heinz Walz IMAGING-PAM Instrument Description And Information For Users

CHAPTER 6
Scope.A1 to the 6-pin "MINI-Head" connector (IMAG-CG
rear side), the IMAG-RGB is connected via IMAG-RBG
cable to RBG-HEAD socket (IMAG-CG rear side)
Notes: All cables should be connected prior to switching on the
Control Unit, the separate POWER-SUPPLY and the
PC is started.
Generally, always first switch off the external POWER-
SUPPLY before exchanging LED-Array cable.
Never have more than one Measuring Head (MAXI-,
MINI- or RGB-) connected at the time.
6.2

Software installation

All software required for operating the IMAGING-PAM already
is installed, when the Notebook PC IMAG-PC was purchased
together with the instrument. Otherwise the user can install the
required software as outlined in the following sub-sections.

6.2.1 Installation and Starting of ImagingWin

The ImagingWinGigE software is delivered together with the
instrument in form of a CD-ROM. For installation of ImagingWin
this CD-ROM is put into the CD-drive of the PC which is going to
be used in conjunction with the IMAGING-PAM. Installation occurs
automatically (Autostart). If the Autostart function is not active under
Windows, the Set-up file has to be started manually from the CD. A
program icon (ImagingWinGigE) and a link to the ImagingWinGigE
Folder are automatically installed on the Desktop.
64
HOW TO GET STARTED