Displaying The Gas Pre-Flow And Gas Post-Flow Time; Displaying The Software Version - Fronius TransSynergic 5000 Operating Instructions & Spare Parts

Displaying the
gas pre-flow and
gas post-flow
time
Displaying the In addition to the software version, these special functions can also be used to display the
software version version number of the welding database, the wire-feed unit number, the software version
of the wire-feed unit and the arc burning time.
52
The set gas pre-flow time is displayed (e.g. GPr | 0.1 s)
Use the adjusting dial to change the gas pre-flow time
Then press the Process button (20) to display the gas post-flow time
setting (e.g. GPo | 0.5 s)
Use the adjusting dial to change the gas post-flow time
Press the Store button to exit.
The software version is displayed
Press the Material button (24) to display the version number of the
welding database
(e.g.: 0 | 029 = M0029).
Press the Material button (24) again to display the number of the
wire-feed unit (A or B in the case of twin-head mounts) and the soft-
ware version of the wire-feed unit
(e.g.: A 1.5 | 0.23).
Press the Material button (24) a third time to display the actual arc
burning time since starting for the first time (e.g. "654 | 32.1" =
65,432.1 h = 65,432 h, 6 min)
NOTE! The arc burning time indicator is not suitable as a basis for
calculating hiring fees, guarantee, etc.
Press the Store button to exit.